Jenn-Air JUGFR242HM00, Use And Care Manual And Installation Instructions

6

PRODUCT DIMENSIONS

OVERALL PRODUCT

Width (up to hinge cover)

237/8" (60.72 cm)

Height (up to hinge cover)

343/8" (87.32 cm)

Glass door model (NOIR™) depth  

(no handle)

233/4" (60.36 cm)

Glass door model (RISE™) depth  

(no handle)

235/8" (60 cm)

Solid door models  

(NOIR™/ RISE™)

235/8" (60 cm)

Panel ready  models depth 

(with 3/4" panel and no handle)

2313/16" (60.5 cm)

Raw Door Height

305/8" (77.75 cm)

NOTE:

 The power cord is 60" (152.4 cm) long.

CUSTOM OVERLAY PANEL

NOTE:

 For standard stainless steel or glass door 

models, skip these instructions and go to "Electrical 

Requirements" section.
If you plan to install a custom overlay panel, you will 

need to create the panel yourself or consult a qualified 

cabinetmaker or carpenter. Refer dimension drawings for 

panel specifications.

IMPORTANT:

The thickness of the overlay panel must be 3/4"  

(19 mm).

Custom solid door overlay panel must not weigh 

more than 20 lbs (9.07 kg).

Custom solid door overlay panel must not weigh 

more than 10 lbs (4.54 kg).

Overlay panels weighing more than recommended 

may cause damage to your appliance.

SOLID DOOR OVERLAY PANEL — PREPARATION

Create the custom overlay panel using the dimensions 

shown in the illustration "Solid door overlay panel and 

hinge routing dimensions". Rout shaded areas to a 1/2"  

(12 mm) depth as shown.

IMPORTANT:

 The following graphic shows a custom 

panel for a door with the hinges installed on the right-

hand side. If your refrigerator has the hinges installed on 

the left-hand side, rotate the custom frame 180° so the 

hinge markings will be on the left.

Solid door overlay panel and hinge routing dimensions

237/8"

(60.72 cm)

343/8"

(87.32 cm)

305/8" 

(77.5 cm)

Depth  

(no handle)

415/16"

(125 mm)

2"

(53 mm)

1/4"

(7 mm)

1/8"

(3 mm)

305/8"

(77.75 cm)

233/4"

(60.3 cm)

1/2"

(12 mm)