Jenn-Air JUGFR242HM00, Use And Care Manual And Installation Instructions

8

ELECTRICAL REQUIREMENTS

Before you move your refrigerator into its final location, it 

is important to make sure you have the proper electrical 

connection.

RECOMMENDED GROUNDING METHOD

A 115 V, 60 Hz, AC only, 15 or 20 A fused, grounded 

electrical supply is required. It is recommended that a 

separate circuit serving only your refrigerator be provided. 

Use an outlet that cannot be turned off by a switch. Do 

not use an extension cord.

NOTE:

 Before performing any type of installation, 

cleaning, or removing a light bulb, unplug refrigerator or 

disconnect power.

INSTALLATION INSTRUCTIONS

UNPACK THE REFRIGERATOR

Before using your refrigerator, all packaging materials 

should be removed and the interior should be cleaned.

Remove tape and glue residue from surfaces before 

turning on the refrigerator. With your fingers, rub a 

small amount of liquid dish soap over any adhesive 

and wipe with warm water to remove.

Do not use sharp instruments, rubbing alcohol, 

flammable fluids, or abrasive cleaners to remove 

tape or glue. These can damage the surfaces of your 

refrigerator. For more information, refer “Refrigerator 

Safety” section.

Dispose of and/or recycle all packaging materials.

After all packaging materials have been removed, 

clean the inside of your refrigerator. Refer the 

cleaning instructions in “Cleaning” section.

NOTE:

 For standard stainless steel or glass door models, 

skip to "Door Closing" section.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, 
fire, or electrical shock.

WARNING

WARNING

Excessive Weight Hazard

Use two or more people to move and install 

refrigerator.
Failure to do so can result in back or other injury.

Important information to know about glass shelves 
and covers:

Do not clean glass shelves or covers with warm water when 
they are cold. Shelves and covers may break if exposed to 
sudden temperature changes or impact, such as bumping. 
Tempered glass is designed to shatter into many small, 
pebble-size pieces. This is normal. Glass shelves and covers 
are heavy. Use both hands when removing them to avoid 
dropping.