Jenn-Air JUR24FRERS, Use & Care Manual

7

7

7

REFRIGERATOR USE

Normal Sounds

Your new refrigerator may make sounds that your old one did not 
make. Because the sounds are new to you, you might be 
concerned about them. Most of the new sounds are normal. Hard 
surfaces, such as the flooring and surrounding structures, can 
make the sounds seem louder. The following describes the kinds 
of sounds and what may be making them.

■

Your refrigerator is designed to run more efficiently to keep 
your food items at the desired temperatures and to minimize 
energy usage. The high efficiency compressor and fans may 
cause your refrigerator to run longer than your old one. You 
may also hear a pulsating or high-pitched sound from the 
compressor or fans adjusting to optimize performance.

■

Rattling noises may come from the flow of refrigerant or items 
stored inside the refrigerator.

■

As each cycle ends, you may hear a gurgling sound due to 
the refrigerant flowing in your refrigerator.

■

You may hear water running into the drain pan when the 
refrigerator is defrosting.

■

You may hear clicking sounds when the refrigerator starts or 
stops running.

Using the Controls

The control panel is located at the top of the compartment and 
facing front. The control of the refrigerator has no mechanical 
parts or buttons. When disconnected, the control panel displays 
nothing and may be difficult to locate. 

Turning Control On/Off

■

The first time that the refrigerator is plugged in, the control 
will be in Cool Off mode. Cool On and Cool Off will be the 
only options that display.

■

Press COOL ON for 3 seconds to turn on the refrigerator. All 
menus and recommended temperature settings will be 
displayed.

Viewing Celsius Temperatures

■

Press the F/C touch pad to toggle between displaying the 
temperature in degrees Fahrenheit and degrees Celsius. The 
corresponding indicator will illuminate. 

Adjusting the Controls

When the refrigerator is turned On for the first time, a 
recommended temperature is set by default. 

■

To adjust set point temperatures, press “+” (plus) or “-” 
(minus) until the desired temperature setting is reached. 

NOTE:

 The default recommended temperature for the refrigerator 

is 37°F (2°C). The set point range for this model is 32°F to 42°F 
(0°C to 5°C).
The control is set correctly when milk and beverages are as cold 
as you like.

NOTE

: Wait at least 24 hours between adjustments so the 

refrigerator can acclimate. 

A. F/C touch pad

A