COMPONENT ACCESS (CONT.)
4-8
n
JennAir® and KitchenAid® 36", 42", and 48" Built-In Side by Side Refrigerators
4. Gently remove the gasket as you will re-use it.
5.
Remove the Air Baffle and foam.
6. Locate the Thermistor mounted inside the cover.
Removing the RC Thermistor
1.
Locate the Thermistor cover on the left side of the back wall.
2.
Pull on cover from the left side to remove.
3. Thermistor is located inside cover.
Removing the LED Modules
1. LED Modules are located along the walls of both the RC and
FC.
2. To remove LED modules from the cabinet walls, protect the
liner while using a putty knife to pry them out.
Figure - Removing the Air Baffle
Figure - Removing the Foam
