COMPONENT ACCESS (CONT.)
JennAir® and KitchenAid® 36", 42", and 48" Built-In Side by Side Refrigerators
n
4-11
3. Remove thirteen (13) 1/4" hex head screws and remove
cover.
Removing the Evaporator Fan
1. Complete the steps
from section Removing the
Evaporator Cover.
2. Remove the tape and piece of foam over the fan assembly.
3. Remove four (4) 1/4" hex head screws.
4. Disconnect the wire harness.
5.
Lift the fan assembly from the bottom and pull out.
6. Remove three (3) 1/4" hex head screws to release evaporator
fan from the housing.