COMPONENT ACCESS (CONT.)
JennAir® and KitchenAid® 36", 42", and 48" Built-In Side by Side Refrigerators
n
4-17
Removing the Dispenser Pad Assembly
1. Complete the steps
from section Removing the User
Interface.
2. Remove drip tray and then remove four (4) screws holding
dispenser housing.
3. Remove door skin by removing three (3) phillips screws on
top, six (6) phillips screws on the side and two (2) phillips
screws on the bottom.
Figure - Removing the Top Screws
Figure - Removing the Side Screws
Figure 3. Removing the Bottom Screws