12
O
VEN
C
OOKING
Control Panel
The control panel is designed for ease in programming. The display window on the control shows time of day, timer and oven functions.
Control panel shown includes Convect and other model specific features. (Styling may vary depending on model.)
Using the Touchpads
•
Press the desired pad.
•
Press the number pads to enter time or temperature.
•
Or, press the
Autoset
pad to enter temperature.
•
A beep will sound when any pad is touched.
•
A double beep will sound if a programming error occurs.
Important:
Four seconds after entering the time or
temperature it will automatically be entered. If more than 30
seconds elapse between touching a function pad and the
number pads, the function will be canceled and the display
will return to the previous display.
A
Bake
Use for baking and roasting.
B
Broil
Use for broiling and top browning.
C
Keep Warm
Use to keep cooked food warm in oven.
D
Clean
Use to set self-clean cycle.
E
Oven Light
Use to turn the upper or lower oven light
on or off.
F
Number Pads
Use to set time and temperature.
G
CANCEL
Cancels all operations except Timer and
Clock.
H
Convect Roast
Use for convection roasting.
I
Convect Bake
Use for convection baking.
J
TIMER 1 or 2
Sets the timer.
K
Clock
Sets the clock.
L
Cook & Hold
Bakes for a preset time, then keeps food
warm for 1 hour.
M
Delay
Programs the oven to start baking or
cleaning at a later time.
N
Favorite
Use to set and save a specific Cook
& Hold procedure.
O
Autoset
Use to quickly set temperatures.
A B C D E F
G H I J K L M N O
Clock
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is set at the factory for the 12-hour format.
To change the clock to 24-hour format:
1. Press and hold the upper
CANCEL
pad
and
Favorite
pad for
three
seconds.
• 12 Hr flashes in the display.
2. Press the
Autoset
pad to select 24 Hr;
press again to select 12 Hr.
3. Set the time of day following the directions in
the
To Set the Clock
section.
To set the Clock:
1. Press the
Clock
pad.
• The time of day flashes in the display.
• Colon flashes in the display.
2. Press the appropriate number pads to set the time of day.
3. Press the
Clock
pad again or wait
four
seconds.
• The colon will remain on.
When electrical power is supplied or after a power
interruption, the last clock time before power was interrupted
will flash.
To recall the time of day when another time function is
showing, press the
Clock
pad.
Pilotless Ignition
(select models)
Your range is equipped with pilotless ignition. With this type
of ignition system, the gas automatically shuts off and
the
oven will not operate during a power failure.
A lighted match will not light the oven burner. No attempt
should be made to operate the oven during a power failure.
Cont.
8113P620-60
3/22/06, 4:34 PM
13
Reviewed by Stewart, Steven | Released
Summary of Contents for Pro-Style JGR8890ADP
Page 23: ...NOTES 22 ...
