17
2.
Lower cover and slide to left or right to slide shoulder screws
into the narrow ends of the notches and lock into place.
To Convert Oven Broil Burner (30" [76.2 cm] and 36"
[91.4 cm] models and the Right Oven Cavity on 48"
[121.9 cm] models)
1.
Remove broil burner screw and set aside.
2.
Pull the broil burner toward you until it slides out of the hole in
the oven back, and pull the electrode out of the bracket. The
broil burner will hang down in the back of the oven while you
change the orifice.
3.
Apply masking tape to the end of a
7
mm nut driver to help
hold the gas orifice spud in the nut driver while changing it.
Insert nut driver into the gas opening and press down onto
the gas orifice spud and remove by turning the gas orifice
spud counterclockwise and lifting out. Set gas orifice spud
aside.
4.
Gas orifice studs are stamped with a letter and a number.
Install the Number 97 oven broil burner orifice spud.
5.
Place Natural gas orifice in plastic parts bag for future use
and keep with package containing literature.
6.
Replace the broil burner in the hole in the oven back, with the
broil burner electrode inside the broil burner electrode hole,
as illustrated.
7.
Reinstall the oven broil burner screw. See Step 1 for
illustration.
To Convert Oven Bake Burner (Left Oven Cavity on
48" [121.9 cm] models)
1.
Remove oven racks.
2.
Remove the oven door. See the “Oven Door” section in the
Use and Care Guide.
A. Bake burner cover
A. Broil burner screw
B. Broil burner
C. Broil burner orifice hole
A. Grasp electrode here.
B. Bracket
A
B
A
C
A
B
A. Oven back
B. Broil burner orifice
C. Broil burner orifice hole
A. Broil burner orifice hole
B. Broil burner electrode
C. Broil burner electrode hole
A
B
C
A
B
C
Summary of Contents for PRO-STYLE JGRP430W
Page 33: ...33 Notes ...
Page 67: ...67 ...
