Step # 4
Clearing ball hopper system
After removing the ball selector wheel
check the opening for balls trapped inside
the highlighted area. Make sure everything
is clean and safely away from the hopper
system and power the game on, test the
extra ball button , checking to see the
motor function. While apart clean hopper
system for proper maintance. These steps
are also used when removing the hopper
motor, the two screws on ope would be
removed the other two are access from the
bottom of the game.
CLEANING A BALL JAM FROM THE HOPPER SYSTEM
Step # 3
Clearing ball hopper system
After removal of the ball agitator,
remove the four philip headed screws
from the ball selector wheel. Once
the screws are removed pull upward
on the selector wheel, the wheel
should release from the motor shaft
fairly easily. Once removed this is
should be seend, the area should be
clean and free of debris.
Jennison Entertainment Technologies
Power Pong Service Manual
Page 38
