Operation
38
Difference image
This function allows you to determine temperature variations in
comparison to an original image. It is useful, if you want to keep track of
dynamic processes or if the object scenery has changed. The original
image is saved to the camera memory using the „Record“ option.
Activating the „Display“ option displays this image. To activate the
difference image mode, select the respective function. If active, the
difference image will be displayed when you switch back to the
recording mode. A „D“ at the margin of the image indicates that the
difference image mode is active.
Scanner
The option list provides the following modes:
– vOFF/middle
Vertical scanner off, line scan in image centre
– vOFF/position
Vertical scanner off, position in image selectable
– vOFF/Pos/nLines Vertical scanner off, position and line number
selectable
– vOFF/hOFF/nPixel Vertical and horizontal scanner off; position
selectable; pixel frequency between 1.5625 KHz
and 100 KHz selectable by factor 2; number of
pixels selectable
Chopper Pause
The image grabbing process is interrupted for a short time by swinging
the reference radiator (chopper) into the optical path. The minimum
time possible between two inserts (chopper pause) is 1.8 s. The
maximum pause interval is 10 min.
InfraTec
Summary of Contents for VARIOSCAN high resolution Series
