Jensen JBS-215, User Manual

E-11

1.  Tap the      POWER/ SOURCE BUTTON (#1) to turn on the unit.

2.  Tap the      POWER/ SOURCE BUTTON (#1) repeatedly to select FM mode, the frequency 

will show on the LCD DISPLAY (#15) instead of the time.  

3. 

Manual tuning:

 Repeatedly tap the TUN-      BUTTON (#5)/TUN+      BUTTON (#8) to 

manually adjust the frequency.

4. 

Automatic Tuning: 

Press and hold the TUN-        BUTTON (#5)/TUN+        BUTTON (#8) 

to automatically tune to the previous or next available station.

5.  Tap the VOLUME – BUTTON (#10) /  BUTTON (#11) to obtain the desired 

sound level.

6.  Press and hold the      POWER/ SOURCE BUTTON (#1) to turn off the unit

Notes:

• Use 

Manual Tuning

 to select weaker stations that might be skipped during Automatic 

Tuning.

• 

If the Automatic Tuning does not stop on the exact frequency of the station, for example, it 

stops on 88.9 MHz instead of 88.8 MHz, use the manual tuning method to “fine tune” to the 

exact frequency of the desired station.

TIPS FOR BEST RADIO RECEPTION

The radio receiver has a build-in FM ANTENNA WIRE (#18) hanging from the back of the 

cabinet. This wire should be totally unwrapped and fully extended for the best reception.

NOTE:

  Automatic tuning depends on the signal strength of the broadcasting station, so weak 

stations may be skipped. You can manually tune to find the weak stations if a station 

gets skipped. With strong signals, the tuner may stop before it reaches the actual 

broadcast frequency, so you may need to manually tune for the best reception.

Setting the Radio Station Presets

The unit allows you to store up to 20 FM stations for easy recall at any time.

1.  Tap the      POWER/ SOURCE BUTTON (#1) to turn on the unit.

2.  Tap the      POWER/ SOURCE BUTTON (#1) repeatedly to select FM mode. 

3.  The FM frequency will show on the LCD display

4.  Tune to the radio station you want to store in memory.

5.  Press and hold PROG BUTTON (#3). The preset channel number “P01” will flash on the 

LCD DISPLAY.

6.  Tap the TUN-       BUTTON (#5)/TUN+       BUTTON (#8) to select the preset location (P01 

– P20).

7.  Tap the PROG BUTTON (#3) to confirm.

8.  To store up to 20 FM station presets, repeat steps 4-7 above.

RECALL PRESET STATION

In FM mode, tap the M- BUTTON (#4) / M+ BUTTON (#6) repeatedly to select the preset 

channel. 

RADIO OPERATION