E-6
ATTACHING THE STAND
1. Align the brackets located on top of the stand with the 2 mounting rails located on the
bottom of the main unit. The notch in the stand will be facing the back of the unit.
2. Slide the stand on the 2 mounting rails forward until it locks in place. A “click” sound will be
heard once the stand is attached.
3. Check that the base is locked firmly in place and doesn’t slide off before placing it on a flat
surface for use.
FOR WALL MOUNTING (STAND REMOVED)
It’s important to be sure there are no electric, gas or water lines located behind the wall where
you are attaching the unit. We recommend having this unit professionally installed.
Use the included wall mounting accessories and follow the wall mounting instructions on the
separate Instruction sheet (included).
4. To remove the stand, push up on the release tab that holds the stand in place and slide the
stand back off the mounting rails.
INSTALLATION OPTIONS
