14
NOTE:
1.) The system provides dual alarm settings so you can preset another wake up time
individually by using the
ALARM 2 Button.
2.) If “Wake to CD” is selected but a CD is not inserted, the alarm will default to the
Beeping Alarm automatically when the alarm wake time is reached.
3.) For ‘Wake to Radio”, the system will default to the last radio station listened to
before switching off.
ACTIVE/DE-ACTIVE ALARM FUNCTION
1. To active ALARM 1, press the
repeatedly until the alarm
indicator “ ” is shown on LCD display .
2. To cancel ALARM 1 function by press again
until the alarm
indicator “ ” goes off.
3. Follow the same operation by pressing
to active / de-active
ALARM 2
function.
Wake to Radio, CD or Beeping Alarm
When the alarm time is reached, the CD, radio or beeping alarm will sound for
60 minutes then shut off and reset itself for the following day (without pressing
the snooze button). You may activate the snooze function manually after the
alarm sounds by pressing the
SNOOZE
Button
. The buzzer stops for the
snooze time
(9
minutes) then comes again. The snooze operation can be
repeated again
within the remaining
50
minutes from the set alarm time.
To stop the alarm immediately after it sounds, tap the corresponding
ALARM 1
/ ALARM 2
Button
on remote control or
Power
Button
on main unit once.
It resets itself for the following day.
Note:
If you press the
Button
on main
unit or
FUNCTION Button
on
remote control when alarm sounding, unit will stop the alarm and switch
to function mode immediately.
To cancel the following day alarm, tap the
ALARM 1 or 2 Button
repeatedly
until corresponding ALARM indicator
goes off.
SNOOZE FUNCTION
Press the
SNOOZE Button
on the remote control or
/ SNOOZE Button
on main unit once
to terminate the alarm mode temporarily, and the alarm will re-start again after 9 minutes on
each press. To cancel the SNOOZE mode, press the
POWER
Button
once. The
SNOOZE icon will disappear from display and alarm icon stop flashing.
RADIO OPERATION
1. Tap the
POWER
Button
on main unit or remote control to turn on the unit.
2. Tap the
FUNCTION
Button
on main or
FUNCTION
Button
on remote
control to select Radio mode, the
“
＂
mode and radio frequency appear in
display.
3. To manually tune to a specific radio station, tap the
or
Button
on either the
main unit or
the
remote control repeatedly. Use the manual tuning method to tune
in weaker stations that are bypassed during Automatic Tuning.
4. To automatically tune to the next available radio station, press and hold the
or
Button
on
the
main unit or remote control for 1-2 seconds until frequency
readout on the display begins to scan and then release the button. The tuner will
FM
/
ALARM 2 Button
“ALARM 1” Button
“ALARM 1” Button
