18
remote control. Wait 10 seconds for the unit to enter pairing mode, the Bluetooth
“PAIRING” message will be scrolling in display.
Note
: If the JBS-350 is connected to other smartphone, press and hold the
Bluetooth
Button
for 3 seconds to enter Bluetooth paring mode.
3. Touch the back of your smartphone to the NFC linking point (#20) located on the
top panel of the unit (near Power ON/OFF button). Check the owner’s manual of
your Bluetooth device to locate the NFC touch point if you are not sure where it is.
4. If the JBS-350 is in pairing mode, it will turn on and enter Bluetooth mode
automatically and pair with your smartphone. Display will show “CONNECTED”
message and then change to show “BT” and Bluetooth icon turns ON.
5. Some smartphones may ask you to confirm the pairing if they are not paired
before.
NOTE
: If you have multiple NFC compatible devices to link, just touch the smartphone
to a different device to switch the connection to that device. For example, when your
smartphone is connected to the JBS-350, just touch the linked smartphone to the
system to disconnect it and then touch another smartphone you want to change the
Bluetooth connection to (one touch connection switching). The connection will
automatically be transferred from your smartphone to the new device.
NOTE ON CONNECTING
Some 3
rd
party batteries and/or add-on wireless charging coils may interfere with
using the NFC feature on this unit. If you followed the directions above for connecting,
but find that you are still having problems connecting using NFC, we recommend
checking to be sure your Bluetooth device is only using factory authorized parts and
batteries.
PAIRING (Linking) a BLUETOOTH ENABLED cell phone OR OTHER
BLUETOOTH ENABLED DEVICE to the JBS-350
If the JBS-350 has never been paired with a Bluetooth device before. You need to
follow the pairing instructions below to link the JBS-350 with your Bluetooth device.
1. Press the
POWER
on main unit or remote control to turn on the unit.
2. Tap the
BLUETOOTH
on main or remote control to select Bluetooth
mode, Bluetooth “PAIRING” message appears in display.
3. If the JBS-350 has never been paired with a Bluetooth device before or cannot
find the last paired device, the “PAIRING” on LCD will indicate the JBS-350 is in
search mode. You need to follow the pairing instructions below to link the JBS-350
with your Bluetooth device.
Turn on the Bluetooth function of your Bluetooth device and enable the search
or scan function to find the JBS-350.
Select "JBS-350" from the device list when it appears on your device screen.
If required, enter the pass code “0000” to pair (link) the JCR-300 with your
device.
4. After successfully pairing (linking), display will show “CONNECTED” and then
change to show “BT”, the Bluetooth icon also will show in display. You can
begin playing music from your Bluetooth device wirelessly to the speaker.
5. After selecting your favorite song, press
PLAY/PAUSE
►
on the unit or
remote control to play or pause the song.
6. Press the volume control
on main unit or
VOL+/–
on
remote control
to adjust to the desired volume level.
/
Button
Button
Button
Button
Button
