E-15
When playing MP3 CD/USB, the play modes are shown as below.
Repeat 1
Repeat All
Repeat Folder
Random
Normal
REPEAT 1
– the track being played and will repeat continuously.
Repeat one icon “REP” flashing in display.
REPEAT ALL
– all tracks will repeat continuously.
Repeat
All icon “REP ALL” flashing in display.
REPEAT FOLDER
– current folder will repeat continuously.
Repeat folder icon “REP ALB” flashing in display.
RANDOM
– the tracks in the CD/USB will be played in random sequency.
Random icon “RAND” flashing in display.
This function allows the tracks to be played in a programmed sequency.
NOTE:
Program can only be set in STOP mode.
1.
Tap the
PROG Button
on main unit or remote control, the program number “P-01”
shows in display, “PROG” icon and CD track number “01” also flashing in the LCD
display.
2.
For MP3 tracks, press
Button
on main unit repeatedly or PRESET
/
Button
on remote control to select an album or a folder
3.
Use the
or
Button
on main unit or remote control to select the desired track.
The track number will be shown in display.
4.
Tap the
PROG Button
on main unit or remote control to store the selected track in the
memory, the next program number will advance on (i.e., “P-02”) in LCD display.
5.
Repeat steps 2 to 3 to store more tracks in the memory. You can store up to 32 CD
tracks or 99 MP3 tracks. Display will show
“FULL” after 32 tracks have been
programmed.
6.
Tap the
Button
on main unit or remote control to start playing the CD in the
programmed sequence.
7.
Press the
REPEAT Button
on main unit or
Button
on remote control to select
different play modes if necessary.
8.
To stop playback, press the
STOP Button
on main unit or remote control.
9.
To erase the program, in the stop position, press
STOP Button
on main unit or
remote control twice, “PROG” icon disappears from display and shown “CLEAR”.
PLAYBACK OF MP3 SONGS VIA THE USB THUMB DRIVE
NOTE:
Inserting the USB drive upside down or backwards could damage the audio system
or the storage media (USB thumb drive). Check to be sure the direction is correct
before connection.
1.
Make sure the unit is off or in USB mode, plug-in the USB thumb drive and make sure
it is fully inserted.
2.
Turn on unit again if it is power off to select USB mode by tap the
MODE Button
on
main unit or remote control repeatedly. The unit will start reading MP3 songs stored on
the thumb drive automatically after connecting, and LCD display will show the total
■
■
►
II
0
folders and tracks of MP3 files being detected.
USB OPERATION
PLAY TRACK SEQUENCE PROGRAMMING
