E-17
start playing and adjust the volume level from paired device.
6.
Rotate the
VOLUME knob
on main unit or
VOLUME
/
Button
on remote control
to adjust the desired volume level.
7.
Press
or
Button
on main unit or remote control to skip to previous or next song.
8.
If you want to pair the
JBS-500
with another Bluetooth enabled device, press and
hold the
PAIR Button
on remote control or
/
PAIR Button
on main unit for 3
seconds or turn off Bluetooth function of device currently paired with
JBS-500
then
repeat step 3 above.
Notes:
1.) Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth
enabled devices for Bluetooth operation since it may vary from model to model.
2.) If your Bluetooth enable device does not support A2DP profile, it will not play the
music through the speaker, even if paired (linked).
3.) If you are pairing (linking) your computer to the unit using Bluetooth, you may
need to set the speaker as your computer’s default sound device.
This unit features an auxiliary audio signal input jack for connection external audio devices
like MP3 players, Digital Audio Device and listen to them through the speakers of this unit.
1. Use an audio cable (not included) with one 3.5mm stereo plug on each end of the cable.
2. Plug one end into the AUX-IN jack on the main unit and the other end of the cable into
the Lineout jack or headphone jack of your external audio device.
3. Turn on the unit and external audio device.
4. Tap the
MODE Button
on main unit or remote control to select AUX-IN mode.
5. The volume level can now be controlled through the main unit. Operate all other
functions on the auxiliary device as usual.
Note:
•
If you connect this unit to the Line-Out jack of your external device, then you only
need to adjust the volume control of this unit.
If you connect the headphone jack of your external device, then you may need to
adjust both the volume controls of your external device and this unit to obtain the
desirable volume setting.
•
Press the
POWER/STANDBY Button
on main unit or remote control to turn off the
unit
when you have finished listening. Don’t forget to switch off the power of your
external device as well.
This unit provides 4 different EQ modes to enhance your listening experience.
You can select the desired effect by pressing the
EQ button
on remote control repeatedly
at following sequence:
CLASSIC
ROCK POP JAZZ
FLAT
•
Press
XBASS Button
on remote control to activate BASS effects if necessary.
5.
After selecting your favorite song, press
Button
on main unit or remote control to
►
II
•
Press again to deactivate the BASS effects until the X-BASS icon disappeared.
■
X-BASS icon
will show in display when enabled.
PRESET EQ / XBASS (REMOTE CONTROL ONLY)
AUXILIARY INPUT OPERATION
