E-7
CALENDAR AND TEMPERATURE DISPLAY
Tap the TEMP/DST BUTTON (#7) repeatedly to display the ambient indoor temperature
momentarily in Fahrenheit and Celsius alternately.
Note: the temperature will update every 2 minutes.
Tap the PRESET/TIME SET/Y-M-D BUTTON (#2) repeatedly at standby mode to display the
current Year and Month/day momentarily (5 seconds).
SETTING UP THE ALARMS
1. Press and hold the VOLUME-/ALARM 1 BUTTON (#6) at standby mode.
2. Alarm 1 LED indicator and the digits of time will flash.
3. Press the TUNING-/HOUR BUTTON (#4) or the /MINUTE BUTTON (#3) to increase the
hour and minute.
4. Tap VOLUME-/ALARM 1 BUTTON (#6) again to set the weekly alarm schedule.
5. Tap TUNING-/HOUR BUTTON (#4) or the /MINUTE BUTTON (#3) to select the desired
alarm schedule.
1 – 7 means alarm will sound from Monday to Sunday.
1 – 6 means alarm will sound from Monday to Saturday only.
1 – 5 means alarm will sound from Monday to Friday only.
6. Tap VOLUME-/ALARM 1 BUTTON (#6) repeatedly to select the wake up option.
Wake to alarm – Alarm LED indicator will light.
Wake to radio – Radio LED indicator will light.
Disable the Alarm – both Alarm and Radio indicator will turn off.
7. The setting will be stored after 5 seconds.
8. Press and hold the VOLUME-/ALARM 2 BUTTON (#5) at standby mode.
9. Alarm 2 LED indicator and the digits of time will flash.
10. Repeat steps 3 to 7 to set the alarm 2.
To view and change the wake up option.
1. Tap VOLUME-/ALARM 1 BUTTON (#6) at standby mode. The LED display will show the alarm
time and wake up option momentarily (5 seconds).
2. Tap VOLUME-/ALARM 1 BUTTON (#6) repeatedly within 5 seconds to select the wake up option
or disable the alarm.
3. The current setting will be store after 5 seconds.
4. Repeat above steps to view and change the wake up option of Alarm 2.
Turning Off the Alarm:
The alarm or radio will sound for 30 minutes unless interrupted by pressing the ON/OFF/SOURCE
BUTTON (#1). It will repeat the chosen alarm again at the same time on the following day according to
the weekday alarm schedule setting.
SNOOZE FUNCTION
When the preset alarm time is reached, the chosen alarm will sound. You can momentarily stop the
alarm sound for 9 minutes by using the snooze function.
Press the SNOOZE BUTTON (#9) for a 9 minutes snooze duration during beep or radio alarm.
During the Snooze delay, the alarm icon RADIO or ALARM will flash.
The Snooze function can be repeated within the alarm duration.
If you set the JCR-231 to the Auto Dim Mode, the LED DISPLAY (#10) will keep on turn on
automatically when the snooze function is activated.
