- 11 -
Press and hold the “DIGI CUE” and press “SHIFT” simultaneously to select one of
three special digital sound effects.
15. SHIFT/STOP
1)
When a Beat effect is activated press the STOP button to stop the effect.
2)
Press the “DRUMS CUE” or “DIGI CUE” button and press “SHIFT” to switch
between effects.
16. HEADPHONE JACK
Monitor your music and effects and independently adjust your headphone volume
with the Cue control (7).
17. MIC INPUT
Connect a microphone to add your voice to the mix.
18. DC CONNECTOR
Connect the supplied AC adaptor to the main appliance.
19. AUX 1, AUX 2
Connect your iPod, MP3 player or auxiliary Audio Device to the Deck via the
supplied 3.5mm cables to the AUX 1 or AUX 2 input jack.
20. LINE OUT
Connect to the external audio system via the supplied RCA cable or 3.5mm Audio
cable. Plug the 3.5mm plug to the line out jack of your DJ Scratch Mixer.
Listening to your Music from other audio device:
To hear the music from your player through the DJ Scratch Mixer, you must connect the
line out jack of the Mixer to a pair of amplified speakers or a stereo system.
Operating the Mixer:
(1) Press the power button to turn on the unit once the AC adaptor is connected.
The power indicator LED next to the power button turns on.
(2) Use the controls and effects on the Mixer to make your own music creations.
Effects Controls:
The mixer allows you to add different effects to
your music.
The effects include 6 Beat effects (3 Digi Cue, 3
Drums Cue) and Scratch effects.
You can easily add these effects as you mix the
music from two audio sources.
The Tempo control allows you to adjust the Beat
speed of the effect to match the beat of your
music.
The SCRATCH and BEAT controls used with the
Jog Wheel allow you to add special sound effects
to your mix.
Headphone: (Not included)
The Mixer allows you to connect a set of headphone to monitor your audio creations.
While using headphones you can monitor music from either Audio Source without
