background image

 

- 5 - 

GETTING STARTED 

1. 

Standard Accessories 

Unpack the unit carefully and remove all the accessories from the giftbox. Please 
keep  the box and packing materials, in case you wish to store the unit. Don’t 
remove any labels or sticker on the rear of the unit and adaptor. Before setting up 
the unit, verify that the following accessories are present: 

 

Main unit x 1   

AC adaptor x 1 

User manual x 1 

Short Audio cable with 3.5mm plugs 
x 1 (about 5” long) 

Long Audio cable with 3.5mm plugs x 1 
(about 36” long) 

RCA cable with 3.5mm plug x 1 
(about 42” long) 

 
2. 

Power source 

This unit is supplied with an AC adaptor, 
take following steps to connect the 
adaptor. 
1) 

Unwind the power cord of the AC 
adaptor to its full length. 

2) 

Connect the DC plug of the AC 
adaptor to the DC socket on the rear 
of the appliance. 

3) 

Then plug the AC adaptor to the AC 
outlet (AC120V  60Hz). Connecting 
this system to any other power 
source may cause damage to the system. For sufficient ventilation, keep other 
objects at least 4 inches away from the unit. 

4) 

Turn on the AC Supply at the wall socket. 

5) 

To switch the unit off completely, unplug the AC adaptor from the wall outlet. 

 

Note: 

 

Do not touch the AC adaptor with wet hands. 

 

Once connected to the power supply, the unit will enter standby mode, Press 
the MAIN SWITCH button to power the unit on. 

 

Please disconnect the AC adaptor from the power supply if the appliance is 
not going to be used for a long period time. 

 
 
 
 
 
 
 

Summary of Contents for JDJ-500

















Reviews: