RADIO OPERATION
Switch Between USA area and Europe area Frequency
In radio mode, press the
VOL
button to enter switch state of the US(USA) and EU(europe)
frequency, then rotate it to switch between US(USA) and EU(europe) frequency.
The system will change the frequency setting in about 3 seconds.
Change Bands (BAND)
Press the
B A N D
button to switch between the FM1, FM2, FM3, AM1 and AM2.
Each band stores up to six preset stations.
Manual Tuning ( / )
Press and hold the
or
button on the front panel or on the remote control to enter manual
tuning mode. In manual tuning mode, press the
or
button to move the radio frequency
number up or down one step.
Auto Seek Tuning ( / )
In standby mode or while not in manual tuning mode, quickly press the
or
button to
move to the next/previous available station automatically.
or
.
STEREO/MONO
FM station is received in stereo mode. However, if the signal
weak or reception is not as
g
Press and hold the
SEL
button or press the
AUDIO
button on remote control to access the menu
functions, then briefly press
SEL
button to choose STEREO/MONO item, rotate the VOL knob to
switch between STEREO and MONO reception.
ood as you would like, switching to MONO mode usually improves the overall sound quality.
To Store / Recall Preset Stations
The radio can be stored 6 preset stations for each band (FM1, FM2, FM3, AM1 and AM2) for a
to tal of 30 preset stations.
To memorize a station:
- Turn the radio on and select the desired band and station.
- Select a station by
button
- Press and hold the desired preset button (numbered 1-6 on the face of the radio) for more
than 2 seconds to save the station to that preset number.
- To recall a preset station:
- Select the desired band.
- Briefly press a preset button (numbered 1-6) to recall the corresponding preset station.
Automatic Store station/ Preset station scan (AS/PS)
Press and hold the
AS
button for more than 2 seconds to select six strong stations and store
them in the current band. The radio will automatically scan the current frequency and enter
the six strongest stations into the preset memory positions for that band.
Briefly press the
AS/PS
button on the remote control to recall each preset station that saved
in the memories in each band.
LOCAL/DX
Press and hold the
SEL
button or press the
AUDIO
button on remote control to access the menu
functions, then briefly press
SEL
button to choose DX/LOC item, rotate the
VOL
knob to enable or
disable the local broadcast mode.
is
In urban areas, most stations are strong enough and “LOCAL ON” mode should be selected.
Switch to LOCAL OFF mode to search for stations with weaker signals.
7
