background image

JHD1510

6

System Menu

1.

Press and hold

 the 

AUDIO/MENU

 button (3) for more than 2 seconds to enter the system 

menu. The first menu item, “Beep Tone”, will appear on the display.

2.

Press the 

AUDIO/MENU

 button repeatedly to navigate the system menu and select the 

desired item.

3.

Use the rotary encoder (1) to adjust the selected menu item.

The following items can be adjusted:

Beep Tone (ON/OFF): Turn the audible beep ON/OFF (heard when functions/buttons are 

selected).

Region (USA/EURO): Set frequency spacing for various regions. 

Time Zone: Set the local time zone (used only for Sirius satellite mode).

DST (Observed/Not Observed): Set for Daylight Savings Time (used only for Sirius 

satellite mode).

Clock (12Hr/24Hr): Select 12 or 24 hour display mode.

Brightness (Low/Mid/High): Adjust LCD brightness.

Contrast (Low/Mid/High): Adjust LCD contrast.

Color (Amber/Green): Adjust for desired panel backlight color.

Pwr On Vol (0 – 40): Select an automatic turn-on volume. 

iPod Auto (ON/OFF): Choose ”ON” to automatically detect and playback iPod when 

connected or “OFF” to use the 

MODE

 button to select the iPod source.

TA Volume (0-40): Adjust for desired Traffic Announcement volume level.

WB Alert (ON/OFF): Choose “ON” to switch to Weatherband mode when NOAA weather 

alerts are issued. (See “NOAA Weather Alert” on page 8.)

Alert PWR (AUTO/OFF): Select “Auto” to turn on the radio when NOAA alerts are issued. 

This function only works when the +12V switched is on.

Default Set (NO/YES): Choose “YES” to return the EEPROM to factory default set up 

values. 

Equalizer

Press the 

EQ/LOUD

 button (11) to choose one of the following pre-defined bass and treble 

curves: OFF > FLAT > ROCK > POP > CLAS(SIC).

Loudness

Press and hold

 the 

EQ/LOUD

 button (11) to toggle loudness on/off. When listening to music at 

low volumes, this feature will boost the bass and treble ranges to compensate for the 

characteristics of human hearing. 

Auxiliary Input

To access an auxiliary device: 
1.

Connect the portable audio player to either the AUX IN on the front panel (17) or at the 

rear of the unit.

2.

Press the 

MODE

 button (4) to select “AUX” mode. The rear AUX audio source will play by 

default until a device is inserted into the front jack.

3.

Press 

MODE

 again to cancel “AUX” mode and go to the next mode.

NOTE: The front AUX IN jack will override the rear auxiliary audio inputs.

PA Operation

Connect the PA Microphone with a 4-PIN connector to the 4-PIN socket on the rear of the 

unit.

The unit will automatically switch to PA mode when the Mic switch is pushed “ON”.

The PA output level can be adjusted using the rotary volume encoder (1).

With radio power off, the radio will wake up when PA mic is keyed to make an 

announcement. Radio will return to off state when PA mic is released.

Liquid Crystal Display (LCD)

The current frequency and activated functions are shown on the LCD panel (20). 

NOTE: LCD panels may take longer to respond when subjected to cold temperatures for 
an extended period of time. In addition, the visibility of the characters on the LCD may 
decrease slightly. The LCD display will return to normal when the temperature increases 
to a normal range.

Setting the Clock

To set the clock to display the current time, turn the vehicle ignition on and turn the radio off. 

Press and hold

 the 

DISP/SCROLL

 button (12) for more than one second and the time will flash 

in the display. Press the 

TUNE/SEEK |<<

 button (18) to adjust the hours or the 

TUNE/SEEK 

>>| 

button (19) to adjust the minutes. When in 12Hr Clock mode, “AM” or “PM” will appear on 

the display to indicate AM or PM. When no adjustment is made for five seconds, the time will 

become set and normal operation will resume.

Scroll 

When the information is too long to be displayed on the LCD, 

press and hold

 the 

DISP/

SCROLL

 button (12) to view the entire title. The information will scroll twice and then return to 

abbreviated text.

Summary of Contents for JHD1510 - Heavy Duty AM/FM/Weather Band Receiver

















Reviews: