background image

11

Store a Station

Select a station, then press and hold a preset button from 

1 – 

6

 on the number buttons (11-16) for two seconds. The preset 

number will appear on the LCD.

Recall a Station

Press a preset button from 

1 – 6

 on the number buttons to 

select the corresponding stored station. 

 

NOTE: Preset buttons are pre-assigned frequencies in 
weatherband mode.

Automatically Store/Preset Scan (AS/PS)

Automatically Store

Select an 

AM

 or 

FM

 band. Press and hold the 

AS•PS

 button (10) 

for 2 seconds to automatically find and store strong stations. 

“Storing Presets” appears on the screen and the new stations 

replace any stations already stored.

Preset Scan

Select a band. Press 

AS•PS

 (10) to scan stations stored in 

the current band. The unit will pause for 10 seconds at each 

preset station. Press 

AS•PS

 again to stop scanning when the 

desired station is reached.

RBDS Operation

This unit is equipped to display RBDS (Radio Broadcast Data 

Service) information when broadcast by the radio station.

NOTE: Radio stations broadcasting RBDS may not be available 
in your listening area.

In FM radio mode, press & hold the BAND/PTY button (17) for 

2 seconds to list the following Program Type (PTY) options: 

ANY/News/Information/Sports/Talk/Rock/Classic Rock/Adult 

Hits/Soft Rock/Top 40/Country/Oldies/Soft/Nostalgia/Jazz/

Classical/Rhythm and Blues/Soft Rhythm & Blues/Foreign 

Language/Religious Music/Religious Talk/Personality/Public/

College/Weather/Emergency Test/Emergency.

To search for stations in a PTY category:

1.   Press  the 

BAND/PTY

 button to view the current PTY 

category.

2.   Press  the   or   buttons to move through the list of 

available categories and select the program type you wish 

to search.

3.   After selecting the desired PTY, press the

 ENTER/TIMER

 

button (6) to search the band for broadcasts of this type. 

“Searching PTY” is displayed while the tuner is searching. 

NOTE: Performing a PTY search on “ANY” will Seek Tune and 
stop on any station broadcasting RBDS, regardless of the 
program type.

NOTE: The RBDS (Radio Broadcast Data Service) is disabled 
when the Preset-Only Tuning is On in system menu.

Weatherband Operation

What is the NOAA Weather Radio/Weatheradio Canada?

NOAA (National Oceanic and Atmospheric Administration) is a 

nationwide system that broadcasts local weather emergency 

information 24 hours a day via the National Weather Service 

(NWS) network. The U.S. network has more than 750 stations 

Summary of Contents for JHD62





















Reviews: