background image

16

APP OPERATION 

ASA Audio App Controller is the ultimate wireless remote 

control for your JENSEN stereo system. Store away your 

old remotes and enjoy the convenience of all the primary 

functions of your JENSEN stereo right from your phone or 

tablet by transforming your mobile device into a functional 

stereo remote control! 

Features 

This app controls all of the primary functions of your stereo 

features including: 

•  Power on/off 
•  Volume and mute 
•  Source mode selection
•  Playback, tuning, switch song

•   

Audio menu controls - bass, treble, balance, fader, 
loudness, volume and speaker 

Connecting and using ASA Audio Control app 

The ASA Audio Control app can be found on the App Store for 
Apple Devices and the Google Play Store for Android Devices. 
After downloading and installing ASA Audio Control app on 
your device, pair your device to the JHD62 as stated above for 
Bluetooth pairing. Once your device is paired you can open 
and begin using the app. 
When ASA Audio Control is installed on Android operating 

system, close the app before Bluetooth pairing, otherwise 
there may be errors on Bluetooth connection.

CARE AND MAINTENANCE

•   Keep the product away from dust and dirt, which can 

cause premature wear of parts.

•   Handle the product gently and carefully. Dropping it 

can damage circuit boards and cases, and can cause the 
product to work improperly.

•   Wipe the product with a dampened cloth occasionally to 

keep it looking new. Do not use harsh chemicals, cleaning 
solvents, or strong detergents to clean the product.

•   Use and store the product only in normal temperature 

environments. High temperature can shorten the life of 
electronic devices, damage batteries, and distort or melt 
plastic parts.

Ignition

The most common source of noise in reception is the ignition 

system. This is a result of the radio being placed close to the 

ignition system (engine). This type of noise can be easily 

detected because it will vary in intensity of pitch with the 

speed of the engine.

Usually, the ignition noise can be suppressed considerably 

by using a radio suppression type high voltage ignition wire 

and suppressor resistor in the ignition system. (Most vehicles 

Summary of Contents for JHD62





















Reviews: