4
SAFETY INFORMATION
When Driving
Keep the volume level low enough to be aware of the road
and traffic conditions.
When Parked
Parking in direct sunlight can produce very high temperatures
inside your vehicle. Give the interior a chance to cool down
before starting playback.
Use the Proper Power Supply
This product is designed to operate with a 12-volt DC
negative ground battery system.
WARNING:
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND
ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED
ACCESSORIES.
INSTALLATION
This unit is designed for installation in vehicle cabs with
an existing 1-DIN radio opening. In many cases, a special
installation kit will be required to mount the radio to the
dashboard. See the dealer where the radio was purchased
for kit availability. Always check the kit application before
purchasing to make sure the kit works with your vehicle.
Before you Begin
1. Disconnect the battery negative terminal.
2. Remove Transport Screws.
Important Notes
•
Before final installation, test the wiring connections to make
sure the unit is connected properly and the system works.
•
Use only the parts included with the unit to ensure proper
installation. The use of unauthorized parts can cause
malfunctions.
•
Consult with your nearest dealer if installation requires the
drilling of holes or other modifications to your vehicle.
•
Install the unit where it does not interfere with driving and
cannot injure passengers during a sudden or emergency
stop.
•
Avoid installing the unit where it will be subjected to high
temperatures from direct sunlight, hot air, or from a heater,
or subject to excessive dust, dirt, or vibration.
DIN Front Mount
1. Slide the mounting sleeve off of the
chassis if it has not already been
removed. If it is locked into position,
use the removal keys (supplied) to
disengage it. The removal keys are
depicted in “Removing the Unit” on
page 6.
