background image

8

of inactivity. The following menu items can be adjusted.

Loudness: 

Press the   or   buttons (20, 19) to toggle the loudness on/off. 

When listening to music at low volumes, this feature will boost 

the bass/treble range to compensate for the characteristics of 

human hearing. 

Bass Level

Press the   or   buttons to adjust the Bass level range from “-7” 

to “+7.”

Treble Level

Press the   or   buttons to adjust the Treble level range from 

“-7” to “+7.”

Balance

Press the   or   buttons to adjust the Balance between the 

left and right speakers from “Left 7” to “Right 7.”

Fade

Press the   or   buttons to adjust the Fader between the rear 

and front speakers from “Rear 7” to “Front 7.”

System Menu

1.   Press and hold the 

SETTINGS

 button (9) for more than 2 

seconds to enter the system menu.

2.   Press  the

 SETTINGS 

button repeatedly or   or   buttons (6, 

7) to navigate the system menu.

3.   Press  the   or   buttons (20, 19) to adjust the selected 

menu item. Press the

 ENTER/TIMER

 button (4) to select 

the desired item. 

The unit will automatically exit the system menu after 5 

seconds of inactivity.

The following items can be adjusted:

•  LCD Dimmer (1-10): Adjust LCD backlight
•  LCD Contrast (1-10): Adjust LCD contrast
•   Bluetooth Devices: Press to 

ENTER/TIMER

 button (4) to 

enter sub-menu. Press   or   buttons (6, 7) to navigate 
list. List loops Press E

NTER/TIMER

 button to select 

device. Press   or   to navigate selected device’s menu 
of available options (Lock/Unlock > Connect/Disconnect 
> Delete and List loops). Press 

ENTER/TIMER

 button to 

select options. 

• 

 Lock/Unlock:  Press 

ENTER/TIMER

 button to lock 

or unlock device. Lock icon displays next to device 
name in menu when device is locked.

• 

 Connect/Disconnect:  Press 

ENTER/TIMER

 button to 

connect or disconnect previous paried device. 

• 

 Delete: Option only available if selected device is 
unlocked. Press 

ENTER/TIMER

 button to delete.

•   Call Auto Answer (On/Off): Turn call auto answer setting 

On/Off.

•   Call Volume (On/Off): Adjust call volume Decrease/

Increase respectively.

•   Clock Set: Setting the clock (HH:MM) and hour format.
•   LV ALARM (On/Off): Low Voltage Alarm On. Monitor 

voltage on ACC line and send alert when voltage is low

.

•   LVAO (On/Off): Low Voltage Auto Off. Automatically turn 

off power to radio when battery voltage is low.

•   P--O TUNE (On/Off): Preset-Only Tune On. If ‘Preset-Only 

Summary of Contents for JHD62





















Reviews: