16
DIMMER
Press the
DIMMER
button to adjust the LED Display intensity from
High/Mid/Low to obtain the best clarity of LED Display readout.
RESETTING
If the system does not respond or has erratic or intermittent operation, you
have experienced an electrostatic discharge (ESD) or a power surge that
triggered the internal microcontroller to shut down automatically. If this occurs,
press the reset button on the back of the unit to reset the unit.
Note: Even though the unit has been internally reset when you press the
"RESET" button, the clock time may still need to be adjusted to the
current time. Please follow the instructions in the "Setting the Clock"
section above.
CARE AND MAINTENANCE
1. Avoid operating your unit under direct sunlight or in hot, humid or dusty places.
2. Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
3. For better Clock Display clarity, avoid operating the unit under direct sunlight or in
strong room illumination.
4. Unplug the unit from the electrical power outlet immediately in case of malfunction.
CLEANING THE UNIT
To prevent fire or shock hazard, disconnect your unit from the AC power source
when cleaning.
The finish on the unit may be cleaned with a dust cloth and cared for as other
furniture. Use caution when cleaning and wiping the plastic parts.
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax
or polish sprays on the cabinet.
If the front panel becomes dirty or smudged with fingerprints it may be cleaned
with a soft cloth slightly dampened with a mild soap and water solution. Never use
abrasive cloths or polishes as these will damage the finish of your unit.
CAUTION
:
Never allow any water or other liquids to get inside the unit while
cleaning.