NOTE:
This unit is not magnetically shielded and may cause color distortion on
the screen of some TVs or video monitors. To avoid this, you may need to move
the unit further away from the TV or monitor if unnatural color shifts or image
distortion occurs.
Remote Control
The remote control operates on one CR2025 battery
(included). To activate the remote control, remove the
insulation tab inserted in the battery compartment.
When the operation of the remote control becomes
intermittent or unsatisfactory, replace the original battery
with a new 3-volt lithium battery.
1.) Slide out the battery holder from the remote control
case.
2.) Replace the 3V CR2025 battery. Be sure the battery is
installed correctly. The remote will not work if the battery
is installed with the wrong polarity.
CAUTION:
Danger of explosion if the battery is replaced incorrectly. Replace only
with the same type battery.
3.) Insert the battery holder back into the battery slot.
NOTE:
Only use a well-known brand of cell battery to ensure the longest life and
best performance.
CLOCK SETTING
NOTE:
i.
The clock has to be set the first time you plug the unit in.
ii.
The Clock is set to default in 12 Hour format mode.
iii.
The
CLOCK/MEMORY
button has dual functions.
Pressing either the RIGHT side of the button or the LEFT
side of the button will activate different functions on the
unit. Please follow the instructions and make sure the
correct side of the button is pressed to activate the feature.
8
