7
Warnings:
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
Be sure that the batteries are installed correctly. Wrong polarity may damage the
unit.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel- cadmium)
batteries.
Only batteries of the same or equivalent type as recommend are to be used.
If the unit is not to be used for an extended period of time, remove the batteries. Any
old or leaking battery can cause damage to the unit and may void the warranty.
Do not dispose of batteries in fire, battery may explode or leak.
Do not try to recharge a battery that is not intended to be recharged; the battery can
overheat, rupture and leak (Follow the battery manufacturer’s directions).
1. Firmly and securely insert the DC plug of the adaptor to the DC jack on the back of
the unit.
AC-DC Adaptor Connection
An AC-DC Adaptor with the output
5V DC 2200mA
(included) is required for operating
the main unit. To connect the AC-DC Adaptor to the unit and 120V~ 60Hz AC Outlet:
2. Plug the adaptor’s AC plugs into an AC outlet.
NOTE:
This unit is not magnetically shielded and may cause color distortion on the
screen of some TVs or video monitors. To avoid this, you may need to move
the unit further away from the TV or monitor if unnatural color shifts or image
distortion occurs.