6
INSTALLATION
CONNECTING THE AC POWER
An AC-DC Adaptor with the output DC5V 2000mA (included) is required for operating
the main unit. Plug in the AC-DC Adaptor by:
1.) Firmly and securely inserting the DC plug side of the adaptor into the DC Jack on
the back of unit
2.) Plug the Adaptor plug into an outlet rated at 120V AC~ 60Hz.
NOTES:
1. Make sure you dock your Apple device prior to turning the power on. If you turn on
the power without having an Apple device docked, the FM radio will be heard. See
the “FM Radio Operation (without Apple Device)” section below for more
information on using the FM scan radio.
2,
This unit is not magnetically shielded and may cause color distortion on the screen
of some TVs or video monitors. To avoid this, you may need to move the unit
further away from the TV or monitor if unnatural color shifts or image distortion
occurs.
LISTENING TO iPod/iPhone
CONNECTING
Before docking any iPod model in the docking bay of the system, please select the
proper adaptor for your particular iPod model. The iPod adaptor included with this
model is for the iPod Classic 160GB, but it should also work with other models too. If
the included adaptor does not fit your iPod, you can still use the dock without an
adaptor or use the original adaptor included with your iPod instead by inserting it into
the docking area. No adaptor is required if you use an iPhone.
1.) Your iPod/iPhone can now be inserted into the docking bay by placing the
connector on the bottom of the iPod/iPhone onto the connector in the docking
bay.
Note:
Please be careful when attaching the iPod/iPhone onto the docking connector
to avoid damaging the 30-pin connector on the iPod/iPhone or in the
docking bay. Never force the iPod/iPhone onto the connector.
2.) Once docked, wait a few seconds to let unit communicate with your iPod/iPhone.
Press the POWER ON/OFF
button to turn on the unit and the blue LED on the
front will light.
Note
: With the power off, if your iPod/iPhone is playing a track while it is being
docked, it will automatically turn on the unit power and continue playing the
same track through the speakers.
3.) Press the PLAY/PAUSE
button to start or pause iPod/iPhone playback.
Note
: If you turn on the unit before the iPod/iPhone is docked, the Play/Pause button
