background image

 

7

TROUBLESHOOTING GUIDE 

Should you experience any difficulties in the use of this player please refer to the following chart or 
call 

1 800 777 5331

 for Product Service and Support. 

 

Symptom Possible 

Problem 

Solution 

Using a wrong iPod adaptor

Make sure the adaptor properly fits for your iPod. 

Cannot dock iPod  
properly 

iPod is not installed 
properly. 

Remove your iPod from the dock and check for any 
obstruction on the connectors in the dock and on your 
iPod, then reseat it in the dock. 

iPod is not installed 
properly. 

Remove your iPod from the dock and check for any 
obstruction on the connectors in the dock and on your 
iPod, then reseat in the dock. 

iPod does not 
respond to the unit. 

Your iPod software is too 
old 

Update software on your iPod. For details, please visit 
http://www.apple.com/ipod/download 

No sound when 
iPod plays 

AUX IN Jack is plugged 

Unplug the audio connection cable. 

No sound from 
speaker in AUX 
mode 

Input source is low 

Increase the volume level on the audio source device.

 
 
No sound when 
played in the AUX 
Mode  
 
 

Power to external source 
(MP3, Laptop etc) not 
switched on. 
 
Master Volume is at 
minimum. 

Switch on the power of the external source. 

 

 
 
Adjust the master volume 

Too much distortion 

Batteries are low. change 
the New Batteries 

Replace all batteries by fresh ones

 
 

SERVICE 

Please refer to the instructions on the enclosed warranty card for returning your unit for service. 
When returning the unit, please remove any batteries to prevent damage to the unit in transit and/or 

from possible battery leakage. Please note that we are not responsible for batteries returned with 

the unit or for the cost of replacement of batteries. 
 
Distributed by: 

Spectra Merchandising International, Inc. 

4230 North Normandy Avenue 

Chicago IL 60634, U.S.A. 

Please have model number ready, for Customer service, call 1-800-777-5331

 

 

iPod is a trademark of Apple Inc., registered in the U.S. and other countries. 
iPhone is a trademark of Apple Inc.                                                       
"Made for iPod" means that an electronic accessory has been designed to connect specifically to 
iPod and has been certified by the developer to meet Apple performance standards.                                            
"Works With iPhone" means that an electronic accessory has been designed to connect specifically 
to iPhone and has been certified by the developer to meet Apple performance standards. 
Apple is not responsible for the operation of this devise or its compliance with safety and regulatory 
standards. 
 

Printed in China 

Summary of Contents for JiSS-250i









Reviews: