9
10. To locate a particular passage within a track, press and hold either the B-SKIP
or F-SKIP
until the section you want is found.
REPEATING PLAYBACK
11. To repeat a particular track, press the PLAY MODE Button once. The REPEAT 1 Indicator appears
in the LCD Display.
12. To repeat the entire CD
,
,
, press the PLAY MODE Button twice. The REPEAT ALL Indicator lights in
the LCD Display.
13. To cancel the REPEAT function, press the REPEAT Button repeatedly until the REPEAT 1 /
REPEAT ALL Indicator disappears from the LCD Display.
RANDOM PLAYBACK(Remote Control Only)
14. To play the tracks in random order, press the RANDOM Button on the remote control. The
RANDOM Indicator will appear in the Display.
15. Press the PLAY/PAUSE Button once. A track is picked at random and playback starts.
16. To cancel the random function, press the RANDOM Button again.
17. To stop playback, press the STOP
■
Button once.
18. When you wish to turn the CD player off, set the FUNCTION selector to the STANDBY/AUX
position. The LCD backlight goes off.
CD PROGRAMMED PLAY
This function allows the tracks to be played in a programmed sequence.
NOTE
: Program can only be set in STOP mode. Up to 20 tracks can be programmed.
1.
In CD stop mode, press the PROGRAM Button once. “
PROG
” indicator will appear and Program No.
“
01
” will appear briefly and then change to Track Number “
01
” and blink together with “
PROG
” in the
LCD Display to prompt for input.
2.
Press the B-SKIP
or F-SKIP
Buttons to select the song to be programmed. For example
track 5 is selected.
3.
Press the PROGRAM Button again to store the selection. The Program Number will advance to
“02
” and then change to the track you just programmed “
05
” and blink to prompt for another input.
4.
Press the B-SKIP
or F-SKIP
Buttons to select the next song to be programmed.
5.
Press the PROGRAM Button to store the second selection. You may repeat steps #2 - #4
to
program as many as 20 tracks.
6.
Press the CD PLAY/PAUSE Button to start playback in the programmed sequence.
