Jensen JiSS-600i, User Manual

9

remote will not work if the battery is installed with the wrong polarity.                         

CAUTION:

 Danger of explosion if the battery is replaced incorrectly. Replace only 

with the same type battery. 

3.) Insert the battery holder back into the battery slot. 

NOTE:

 Only use a well-known brand of cell battery to ensure the longest life and 

best performance. 

GETTING START   

Note: 

Before first use, please charge the satellite speakers for at least 12 hours 

because the batteries may not fully charged, even though the LED lights.

You must follow the 

“Linking”

 process below to link the transmitter with satellite 

speakers prior using this wireless music system. 

1. Plug the USB Transmitter into the USB port of the docking base. 

2. Press the POWER ON/STANDBY

 button

on the docking base or press and 

hold it on the remote control to turn on Docking Base, the Power LED indicator 

will change from red to green. 

3. Turn the left satellite speaker power to ON and switch the speaker channel 

setting to “Left”, the speaker status LED will be flashing green. 

4. Press and hold the Link button located on the back of the speaker box for about 

3 seconds and then release it. The speaker status LED will rapidly flash green.   

5. Now press the link button on the USB transmitter for 3 seconds, and then 

release it. The LED on the Transmitter rapidly flashes red during the linking 

process between the transmitter and the speaker. 

6. When the speaker and transmitter successfully link, the LED on the speaker will 

light solid green and the LED on the transmitter will slowly flash red. The 

transmitter LED will light solid red when music is transmitting from the docking 

base or from your computer. 

7. Turn the right satellite speaker power to ON and switch the speaker channel 

setting to “Right”. Repeat above step 3 - 6 to link the right speaker with the 

transmitter. 

8. When both speakers are successfully linked, you will be able to hear the sound 

coming from the speakers when playing music. 

Note:

 If you activate the linking process during music playback, a beeping tone 

will come out from the speaker for about 15 seconds after you press and 

hold the link button of the speaker. A continue tone will be heard if you and 

then press and hold the link button of the transmitter within this period.