Jensen JiTS-260i, User Manual

LISTENING TO YOUR iPhone/iPod

PLAYBACK

1.Push down on the back of the docking bay cover to open it and expose the docking bay.
2.Use the iPod adaptor included with your iPod (if needed) and insert it into the docking area. 
   No adaptor is required if you use an iPhone. Your iPod/iPhone can now be inserted into the 
   docking bay by placing the connector on the bottom of the iPhone/iPod onto the connector 
   in the docking bay. 

Note: 

Please be careful when seating the iPhone/iPod into the docking bay to avoid damaging 

           the 30-pin connector on the iPhone/iPod or in the docking system.
3.Turn on the POWER ON/OFF switch on the back of the unit, and the standby indicator lights.
4.Press the      STANDBY button to turn on the unit. The standby indicator goes off and the 
   function indicator lights.
5.Press the FUNCTION button or iPod button on the remote control to select iPod/Music 
   mode (the Red indicator lights on the FUNCTION button) and then press the 
   PLAY/PAUSE       button to start playback.
6.Press the PLAY/PAUSE       button on the remote control to pause or resume playback.
7.Press the VOLUME Up (+) / Down (-) button to adjust your desired volume level
8.Press the BASS + / - button on the remote control to adjust the desired bass level.
9.Press the 

or 

button on the remote control to select the desire music track. 

   Press and hold the 

   or        button for fast-rewinding or fast-forwarding during playback.

10.To remove the iPhone/iPod from the unit, press and hold the PLAY/PAUSE      button on 
   the remote control for five seconds to switch off the device and then gently remove it from 
   the docking connector.
11. Press the      STANDBY button to place the unit into standby mode. You can also 
   completely turn off the power to the unit by switching the Main POWER ON/OFF switch 
   on the back of the unit to the OFF position.
12. Close the dust cover after use.

iPod/iPhone playback function (Using Remote Control):

Press the MENU button, SELECT button and    /    buttons on the remote control to control 
the iPod menu, scroll menu up/down and enter selection.

Note: 

1.The iPod Menu Control function will work with most iPod touch/iPhone models in 

iPod mode. Please make sure your iPod/iPhone is in

 iPod/Music

 mode. The function will 

NOT work if the iPod/iPhone is on the 

MAIN

 or 

LOCKED 

screen.

2.The iPod menu navigating function of remote control will work on most iPhone or iPod 

    models except for the iPod nano 6th gen.

Press the REPEAT button repeatedly to cycle through the repeat options (repeat 1, 

    repeat all and repeat off) of your iPhone/iPod.

Press the SHUFFLE button to enable or disable the shuffle play function of your 

    iPhone/iPod.

Charging

Your iPhone/iPod will charge in all function modes when docked,

NOTE:

 To prevent damaging the dock connector, never twist the iPhone/iPod when 

inserting or removing it.

8