22
STEREO PHONOGRAPH OPERATION
1.) Raise the turntable dust cover.
2.) Release the Tone Arm Clamp, and remove the stylus protector.
3.) Slide FUNCTION selector to PHONO position.
4.) Place a record on the turntable, over the central spindle.
5.) Place the 45 rpm adapter over the central spindle when playing 45 rpm records.
Set the Speed Selector Switch to 33, 45 or 78 rpm according to the record
you are playing.
6.) Move the Tonearm to the beginning of the record, or to the start of a particular
track. Gently lower the Tonearm onto the record to start playing. Adjust the
Volume and Equalizer setting as desired.
7.) To pause during playback use the Cue Control lever to lift the Tone Arm from
the record. To resume playback gently move the Cue Control forward to lower
the Tone Arm back on to the record.
8.) At the end of the record the Tone Arm will automatically return to its rest and
the turntable stops, however the system power is still "On".
9.) If you are finished playing records press the POWER
button to shut the
system Off , or use the FUNCTION selector switch to select a different function.
NOTE:
1. Do not turn or stop the turntable manually. Moving or jarring the
Turntable without securing the Tone Arm clamp could result in damage to
the Tone Arm.
MS9903TT_ib080503.p65
5/8/2003, 11:44
21
10.)
.
Lock the Tone Arm Clamp.
2. Recommend you replace the stylus protector after finish listening each time.
