Jensen JSB-200, User Manual

10

Note:

 If you want to connect the JSB-200 to another cell phone after pairing 

successfully, then you need to turn off the Bluetooth on the paired cell phone 

first if it is in range before going through the above steps. Otherwise, the 

JSB-200 will automatically reconnect to the previously linked cell phone or 

device.

5.  Press the /- button

 to adjust the desired volume level.

6.  To turn off the JSB-200 Bluetooth, press the 

  POWER button on remote control 

or press and hold the 

/SOURCE button on main unit to turn the unit to standby 

mode. Mode Indicator LED turns red. Don’t forget to also turn off the Bluetooth 

feature on your cell phone or Bluetooth device. 

Notes:  

1.) Refer to manual of your cell phone or other Bluetooth enabled device for 

Bluetooth operation, since it may vary from model to model. 

2.) If your Bluetooth enabled device does not support A2DP, it will not play the music 

through the speaker, even after it's paired (linked). 

3.) If you are pairing (linking) your computer to the JSB-200 using Bluetooth, you 

may need to set the JSB-200 as your computer’s default sound device. 

CONTROLLING THE MUSIC PLAYBACK ON YOUR BLUETOOTH DEVICE USING 

THE REMOTE CONTROL 

1. Press the    POWER button to turn on the unit. 

2.  Turn on Bluetooth of your cell phone or device which was previously paired with the 

JSB-200, press the SOURCE button on remote control or tap 

/SOURCE button 

on main unit repeatedly to select the Bluetooth mode, the Mode Indicator LED turns 

blue and begins flashing

.

3.  After the Bluetooth device is paired with the JSB-200, wait for 5 seconds and then 

press the PLAY/PAUSE

  button on remote control to start music playback from 

your cell phone or Bluetooth device. 

4. Press the PLAY/PAUSE

  button to pause or resume playback. 

5.  Press the /- button to adjust your desired volume level 

6. If necessary, press the TREBLE or BASS +/- buttons on the remote control to adjust 

the separate treble and bass levels. 

7. Press the 

 or 

 button on the remote to select the desire music track.   

8. Press the 

  POWER button on remote control or press and hold the 

 button on 

main unit to turn off the unit after listening.