Jensen JSB-200, User Manual

12

LISTENING TO AUDIO FROM A TV/DVD PLAYER/VCR OR DVR 

You can connect 

the JSB-200 

to other external audio devices using the AUX-IN 1 RCA 

connectors located on the back of the unit.

1. Connect the external TV/DVD/VCR/DVR to AUX-IN 1 RCA connectors on the back 

of the unit (RCA connection cable included). Make sure

 the color coded plugs are 

attached to the corresponding color coded connectors on the device. 

2. Press the 

  POWER button to turn the unit on. 

3. 

Select external audio input by pressing the

 SOURCE button on the remote control or 

tap the 

/SOURCE button on the main unit repeatedly t

o select AUX IN 1 mode

, 

Mode Indicator LED turns green. 

4. 

The volume level can now be controlled through the main unit. Operate all other 

functions on the external device as usual. 

AUXILIARY INPUT   

This unit provides an auxiliary audio signal input jack for connecting external audio 

devices like MP3 players, CD players and listen to them through the speakers of this 

unit. 

1. Use an audio cable (included) with one 3.5 mm stereo plug on each end of the   

cable. 

2. Plug one end into the AUX-IN 2 jack on the right hand side (top panel) of main unit 

and the other end of the cable into the Line-out Jack or Headphone Jack of your 

external audio device. 

3. Turn on the external audio device

and the main unit.

4. To select auxiliary audio input, p

ress the SOURCE button on remote control or tap 

/SOURCE button on main unit repeatedly to select AUX IN 2 mode, Mode Indicator 

LED turns orange. 

5. The volume level can now be controlled through the main unit. Operate all other 

functions on the auxiliary device as usual.

NOTE: 

Š

If you connect this unit to the Line-Out Jack of your external device then you only 

need to adjust the volume control of this unit. If you connected the Headphone Jack 

of your external device then you may need to adjust both the volume control of your 

external device and the volume control of this unit to find the most desirable volume 

setting. 

Š

Press the 

  POWER button to turning off the unit when you finish listening. Don't 

forget to switch off the power of your external device as well.