5
Mounting the JSB-200 on a wooden wall
It’s important to be sure there are no electric, gas or water lines located behind the wall
where you are attaching the sound bar. We recommend having this speaker
professionally installed.
Use the included wall mounting accessories and template to
attach the sound bar to the wall.
1. Use the supplied wall mounting template to make drill hole marks on the wall.
Make
sure the marks are level before drilling.
2. Attach the Metallic Brackets to the wall by screwing the supplied flat head screws
directly into the marks that you have made on the wall as shown above.
3. Place the sound bar onto the mounting brackets. Make sure the sound bar is
attached firmly to the wall.
Mounting the JSB-200 on a wall
1. Use the supplied wall mounting template to make drill hole marks on the wall for the
anchors. Make sure the marks are level before drilling.
2. Use a 1/4” (6.35mm) bit and power drill (Not supplied) to drill holes on the marks.
3. Insert the included plastic anchors into the holes and push in until they are flush with
the wall.
4. Secure the supplied Metallic Brackets to the wall by screwing the included flat head
screws into the anchors and tighten until the screw head is fully inserted and flush
with the metallic bracket.
5. Place the sound bar onto the mounting brackets. Make sure the sound bar is
attached firmly to the wall.
Use a power drill to make pilot holes for the
plastic anchors
