E-4
POWER SOURCE
POWER CONNECTION
This unit is designed to operate only on normal 120V ~ 60Hz AC house current. Plug the AC power
cord into a household outlet AC source.
ATTENTION:
Operating this unit from any other power source may cause damage to unit and such damage is not
covered by your warranty.
LOCATION OF CONTROLS
1. VOLUME CONTROL
2. HEADPHONE JACK
3. POWER BUTTON
4. POWER INDICATOR
5. FUNCTION SELECTOR
6. FM STEREO INDICATOR
7. TUNING KNOB
8. FM ANTENNA
9. EXTERNAL SPEAKER TERMINALS
10. INTERNAL SPEAKER SHUT-OFF
SWITCH
11. AC POWER CORD
12. TONE ARM
13. TONE ARM REST
14. SPEED SELECTOR
15. 45 RPM ADAPTOR
CONNECTIONS
SPEAKER TERMINALS
Connect EXTERNAL SPEAKERS (NOT INCLUDED) to the SPEAKER TERMINALS (9) located on
the rear of the unit (RED WIRE TO RED TERMINAL, BLACK WIRE TO BLACK TERMINAL).
Notes:
Make sure that the INTERNAL SPEAKER Switch (11) is in “ON” position if external speakers are
not connected.
