E7
BLUETOOTH OUT OPERATION
The product supports Bluetooth wireless connection (
OUT
). It can be
connected with external Bluetooth compatible headphones (not included) and
Bluetooth speakers (not included).
1.
Rotate the FUNCTION SELECTOR (#12) to select the
OUT
mode.
2.
Rotate the POWER / VOLUME CONTROL (#13) clockwise to turn on
the unit, the POWER/FUNCTION INDICATOR (#15) will turn blue and
begin to flash slowly.
3.
Turn ON your external Bluetooth receiver device (such as Bluetooth headphones or Bluetooth speakers) and set
to pairing mode.
4.
When pairing is complete, you will hear a chime and the POWER/FUNCTION INDICATOR (#15) will stop
flashing and remain lit blue.
5.
You are now connected to your external Bluetooth device.
6.
Begin playing a record or cassette tape, the sound will be heard from the external Bluetooth device.
NOTE:
You
can ONLY adjust the volume using the volume control on your external Bluetooth device.
Notes:
•
Place the Bluetooth device within 3 feet (1m) of the JTA-245 in order for them to pair correctly.
•
The JTA-245 stays in the pairing mode for 30 seconds. If pairing is not properly competed within 30 seconds,
follow the above steps again from the beginning after turning all devices OFF.
•
“
OUT
” only works with the turntable and cassette player.
OUT will NOT work with the AUX IN or regular
Bluetooth (
IN) function modes.
BLUETOOTH OPERATION
An external device with Bluetooth Connectivity, like a cell phone, can be wirelessly connected to this turntable using
the Bluetooth IN function.
1.
Rotate the FUNCTION SELECTOR (#12) to select the
IN
mode.
2.
Rotate the POWER / VOLUME CONTROL (#13) clockwise to turn on
the unit, the POWER/FUNCTION INDICATOR (#15) will turn blue and
begin to flash.
3.
Turn on the Bluetooth feature of your Bluetooth device and enable the
search or scan function to find the “JTA-245” under the available
devices list.
4.
Select JTA-245 from the device list when it appears on your devices screen. If required, enter the pass code
“0000” to pair (link) the JTA-245 with your device.
5.
Once connected, the POWER/FUNCTION INDICATOR (#15) will stop flashing and remain lit blue.
6.
You are now connected to your external device via Bluetooth.
7.
Rotate the POWER / VOLUME CONTROL (#13) and the volume control on your Bluetooth device to adjust the
sound level.
Notes:
1.
Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth enabled devices for Bluetooth
operation since it may vary from model to model.
2.
If your Bluetooth enabled device does not support A2DP profile, it will not play the music through the speaker,
even if paired (linked).
3.
Remember to turn off the JTA-245 when you have finished listening.
4.
Don't forget to switch off the power of your external audio device as well.
