E-7
8.
Slowly adjust the output volume to the desired level.
9.
At the end of the record, the platter will automatically stop spinning if the AUTO STOP ON/OFF
SELECTOR (#5) remains in the "ON" position. Lift the TONE ARM (#7) away from the record
surface and return it to the Tone Arm Rest.
10. To stop playing manually, lift the TONE ARM (#7) from the record surface using the TONE ARM
LIFT LEVER (#4) while playing and return it to the Tone Arm Rest directly.
Notes:
•
The PITCH CONTROL (#16) allows you to fine tune the playing speed of the record once the
correct speed (33/45/78 RPM) is chosen. Rotate the PITCH CONTROL to slightly increase or
decrease the speed of the turntable if necessary.
•
Certain types of records may have an auto-stop area outside the preset limit, so the turntable
may stop before the last track finishes. If this occurs, set the AUTO STOP ON/OFF SELECTOR
(#5) to the "OFF" position. This allows the record to play to the end, but please note that it will not
stop automatically. You must manually lift the TONE ARM (#7) and place it back on the Tone Arm
Rest and then set the AUTO STOP ON/OFF SELECTOR (#5) to the “ON” position to stop the
turntable from spinning.
•
To stream your record music to external Bluetooth speakers (not included), see the BLUETOOTH
OUT OPERATION section.
BLUETOOTH OUT OPERATION
The JTA-315 system supports Bluetooth wireless connection (
OUT
). It can be connected with
external Bluetooth compatible headphones (not included) or Bluetooth speakers (not included).
1.
Rotate the FUNCTION SELECTOR (#13) to select the
OUT
mode.
2.
Rotate the POWER/VOLUME CONTROL (#12) clockwise to turn the
unit ON. A click sound will be heard and the POWER/FUNCTION
INDICATOR (#10) will light "blue" and begin to flash slowly.
3.
Turn ON your external Bluetooth receiving device (such as Bluetooth
headphones or Bluetooth speakers) and set to pairing mode.
4.
When pairing is successful, you will hear a chime and the
POWER/FUNCTION INDICATOR (#10) will stop flashing and remain lit "blue".
5.
You are now connected to your external Bluetooth device.
6.
Begin playing a record, the sound will be heard from the external Bluetooth device.
Note:
You can ONLY adjust the volume using the volume control on your external Bluetooth device.
Notes:
•
Place the Bluetooth device within 3 feet (1m) from the JTA-315 to enable them to pair correctly.
•
The JTA-315 stays in the pairing mode for only 30 seconds. If pairing is not properly completed
within 30 seconds, repeat #2 to #4 of above steps again after turning all devices OFF.
•
“
OUT
” only works in PHONO mode. OUT will NOT work in the AUX IN or regular Bluetooth
( IN) function modes.
BLUETOOTH IN OPERATION
An external device with Bluetooth Connectivity, like a cell phone, can be wirelessly connected to the
JTA-315 system using the Bluetooth IN function.
