background image

 

E1 

WARNING 

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION 

CORD,  RECEPTACLE  OR  OTHER  OUTLET  UNLESS  THE  BLADES  CAN  BE  FULLY 

INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO 

NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. 

 

 

 

 

 

 

IMPORTANT SAFETY INSTRUCTIONS 

 

1.  Read these instructions - All the safety and operating instructions should be read before the 

appliance is operated 

2.  Keep  these  instructions  -  The  safety  and  operating  instructions  should  be  kept  for  future 

reference. 

3.  Heed all warnings - All warnings on the appliance and in the operating instructions should 

be adhered to. 

4.  Follow all instructions - All operation and use instructions should be followed. 
5.  Do not use this apparatus near water - The appliance should not be used near water; for 

example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a 
swimming pool, and the like. 

6.  Clean only with dry cloth - The appliance should be cleaned only as recommended by the 

manufacturer. 

7.  Do  not  block  any  ventilation  openings.  Install  in  accordance  with  the  manufacturer’s 

instructions.  -  The  appliance  should  be  situated  so  that  its  location  or  position  does  not 
interfere with its proper ventilation. For example, the appliance should not be situated on a 
bed, sofa, rug, or similar surface that may block the ventilation openings; or placed in a built-
in installation, such as a bookcase or cabinet that may impede the flow of air through the 
ventilation openings. 

8.  Do  not  install  near  any  heat  sources  such  as  radiators,  heat  registers,  stoves  or  other 

apparatus (including amplifiers) that produce heat. 

9.  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug 

has two blades with one wider than the other. A grounding type has two blades and a third 
grounding  prong.  The  wide  blade  or  the  third  prong  are  provided  for  your  safety.  If  the 
provided  plug  does  not  fit  into  your  outlet,  consult  an  electrician  for  replacement  of  the 
obsolete outlet. 

10. Protect the power cord from being walked on or pinched particularly at 

plugs, convenience receptacles, and the point where they exit from the 
apparatus. 

11. Only use attachments / accessories specified by the manufacturer   
12. Use  only  with  the  cart,  stand, tripod,  bracket,  or table  specified  by  the 

manufacturer,  or  sold  with  the  apparatus.  When  a  cart  is  used,  use 
caution when moving the cart/apparatus combination to avoid injury from 

Summary of Contents for JTA-325BTW



















Reviews: