1) Dust Cover
2) Power Led Indicator
3) 3.5mm Headphone Jack
4) Power ON/OFF/ Volume Control Knob
5) 45 RPM Record Adaptor
6) 33/45/78 RPM Speed Selector
7) Tone Arm Rest/Holder
8) Line Out Socket (L/R)
9) USB Port For Computer Connection
10) Auto Stop Switch
11) AC Power Cord
CONNECTION
1. Connect the power cord to an AC outlet 240V~ 50Hz.
2. Plug in your headphone into the Headphone Jack on the front panel. You may
connect line out RCA connectors located on the unit back to your external amplifier to
listen to the music instead.
3. To encode or record the vinyl record on your computer, connect the USB port of the
Turntable to a suitable USB port on your computer via the USB cable provided.
4. Turn on the power and the power LED indicator will light, your system is now ready to
play your music. Please refer to the Operations section of this Manual for details.
Note:
This unit has no built-in speaker, you will need to make connection at least one
way mentioned above in order to hear the music when playing your records.
4
LOCATION OF CONTROLS