Jensen JTA-990, User Manual

E19



 The CD-R disc cannot be recorded again after finalizing. 



Finalized CD-R discs can be played in ordinary CD players, but finalized CD-RW disc may 

not play in ordinary CD players

.



Due to the variance of the compatibility of CD-R or CD-RW discs in the market, please 

change to other one if you find the recording performance of the existing one unacceptable. 
This is not a malfunction of the system

.

C) UN-FINALIZE OR ERASING A CD-RW DISC 

It is possible to erase the last recorded track or erase a whole recorded disc (CD-RW only). 

 
i.) UN-FINALIZE A CD-RW DISC   

1.  Press the CD/USB button to select CD mode. 
2.  Press the CD Door open/close button 

  on main unit to open the CD tray, place the 

CD-RW disc you would like to un-finalize into the CD tray. 

3. Press the    button to close the CD tray. The system will perform a search and the LCD 

display will show ‘---bUSY’. Wait for busy message disappear from display. 

4.  In CD stop mode, press the ERASE button on remote control or main unit, the LCD display 

will show ‘UNF-dIC’ message. 

5.  Press the Play/Pause button 

  to start un-finalizing, ‘---bUSY’ message will appear on the 

LCD display. 

6.  Once the un-finalizing process has finished, the LCD display will show total track numbers, 

total playing time and ‘NO TOC’ indicator. 

Ii.) ERASE ONE TRACK 

1.  Press the CD/USB button to select the CD mode.   
2.  Press the CD Door open/close button 

  on main unit to open the CD tray. 

3. Place the 

un-finalized 

CD-RW disc from which you would like to delete tracks, into the CD 

tray. 

4. Press the    button to close the CD tray. The system will perform a search and the LCD 

display will show ‘---bUSY’. Wait for busy message disappear from display. 

5.  In CD stop mode, press the ERASE button on remote control or main unit. The LCD display 

will show ‘ErS’ (erase) message and the last track number of the disc. 

6.  Press the Play/Pause button 

  on main unit or remote control to erase the last track from 

the disc. ‘---bUSY’ message will appear on the LCD display. Once the erasing process has 
finished, the LCD display will show the disc’s total number of tracks and the total playing 
time. 

7.  Repeat steps 5 to 6 to continue erasing more tracks if necessary. 
8.  The ‘NO TOC’ (No Table of Contents) indicator will appear on the LCD display when ALL 

tracks have been deleted. 

iii.) ERASE ALL TRACKS   
NOTE:

This operation cannot be undone. The ‘erase one track only’ function cannot be