Introduction
Congratulations on your purchase of the Jensen JTM-105A True RMS
Autoranging Multimeter. This meter measures AC/DC Voltage, AC/DC
Current, Resistance, Capacitance, Frequency (electrical & electronic),
Diode Test, and Continuity plus Thermocouple Temperature. It features a
waterproof, rugged design for heavy duty use. Proper use and care of this
meter will provide many years of reliable service.
Safety
This symbol adjacent to another symbol, terminal or
operating device indicates that the operator must refer
to an explanation in the Operating Instructions to avoid
personal injury or damage to the meter.
WARNING
This
WARNING
symbol indicates a potentially
hazardous situation, which if not avoided, could result
in death or serious injury.
CAUTION
This
CAUTION
symbol indicates a potentially
hazardous situation, which if not avoided, may result
damage to the product.
MAX
1000V
This symbol advises the user that the terminal(s) so
marked must not be connected to a circuit point at
which the voltage with respect to earth ground
exceeds (in this case) 1000 VAC or VDC.
This symbol adjacent to one or more terminals
identifies them as being associated with ranges that
may, in normal use, be subjected to particularly
hazardous voltages. For maximum safety, the meter
and its test leads should not be handled when these
terminals are energized.
This symbol indicates that a device is protected
throughout by double insulation or reinforced
insulation.
JTM-105a V3.0 10/07
2
