JWM40
9
DISC OPERATION
CD OPERATION
Inserting a CD
Insert a CD label-side up into the disc slot (11)
and the disc will begin to play automatically.
Ejecting a CD
Press the
EJECT
button (13) to stop CD play
and eject the CD.
Pausing Playback
Press the
||
button (3) to suspend or resume
disc play
Stop Playback
Press the
1
■
button (27) to suspend disc play,
and “PRE-STOP” will appear on the display.
Press the
||
button to resume disc playback
from the last position. Press
1
■
button twice
and “STOP” will appear on the display.
Track Select
Press the
>>|
or
|<<
buttons (5, 2) to advance to the previous or next track on the CD.
The selected track number will appear on the display.
Press and hold
the
>>|
or
|<<
buttons for more than three seconds to fast forward or fast reverse through the disc.
CD play starts when the play/ pause button is pressed.
Fast Forward/Reverse
Press and hold
the
>>|
or
|<<
buttons or press the
>>
or
<<
buttons on the remote
control (16) once for FORWARD X 2.
Press and hold
additional times for FORWARD
X 4, X 8, X 20 or PLAY. Press the
||
button on the control panel (3) or remote control
(17) to end fast forward or reverse and resume normal playback.
Repeat (RPT)
Press the
4
button (33) during disc play to access the repeat function. Press again
to continuously repeat the selected track (RPT ONE). Press a third time to repeat all
tracks (RPT ALL). Press one more time to stop the repeat function (RPT OFF).
Random Shuffle (RDM)
Press the
3
button (31) during disc play to play all tracks on CD in random, shuffled
order (RDM ON). Press
3
again to stop random play (RDM OFF).
Remote Control Direct Track Entry
To select a track directly, use the number pad on the remote control (9). For single
digit entries, press the corresponding number for two digit entries. Press the
10+
button followed by the last digit (i.e., for track 16, press
10+
and then 6).
GOTO Direct Track/Chapter Access
Use the
GOTO
function to access a track (chapter) directly.
1.
Press the
GOTO
button (25) on the remote control. The On Screen Display
information will appear with the track number highlighted.
2.
Use the number keys on the remote control to enter the 3-digit track number
directly (i.e. for track 10, enter “010”).
3.
Press the
ENTER
button (5) to confirm and begin playback.