JWM40
5
BASIC OPERATION
Power
Press the
POWER
button (16) to turn the unit on or enter standby mode. The unit will
resume at the last mode (Tuner, Aux, etc.) after turn on.
Volume control
Rotate the
VOL
encoder knob control clockwise to increase or counter- clockwise to
decrease the volume output.
The maximum volume setting is “40”. While adjusting the volume, the LCD displays
numerical representation of the level.
Audio Menu Setting
Press the
AUDIO
button (22) to step through the following audio adjustment options.
Rotate the
VOL/ENTER
encoder knob control to adjust the selected audio feature.
Audio Adjustment
BAS: Adjust the Bass level from "-7" to "+7".
TRE: Adjust the treble from "-7" to "+7".
BAL: Adjust the speaker output balance between "L7" (left) and "R7" (right).
"BAL 0" indicates an equal balance between the left and right speakers.
FAD: Adjust the speaker fade between “R7” (rear) and “F7” (front). “FAD 0”
indicates and equal balance between the rear and front speakers.
This function will time out after ten seconds of inactivity and the unit will
resume normal operation.
Loudness
Press the
LOUD
button (22) to toggle the loudness function on/off.
Mute
Press the
MUTE
button (3) to silence the audio output in tuner, CD, DVD, BT, USB or
auxiliary input mode. Press again to restore the previous volume level.
Liquid Crystal Display (LCD)
The liquid crystal display (LCD) panel (20) displays the frequency, time and activated
functions.
Press the
BRIGHT UP
button (34) to increase the LCD brightness and press the
BRIGHT DOWN
button (32) to decrease the LCD brightness from “LEVEL 0” (off) to
“LEVEL 9” (brightest).
NOTE: When subjected to cold temperatures for an extended period of time,
LCD panels will take longer to illuminate and the display visibility may slightly
decrease. Optimal LCD operation will return to normal when the temperature
increases to a normal range.
System menu setting
1.
Press the
SETTING
button (23) to enter the system menu.
2.
Press
SETTING
button or press the
|<<
or
>>|
( 2,5) to choose the following
system menu list:
3.
Once the desired menu item appears on the display, adjust that option by
rotating the volume encoder knob clockwise or counter-clockwise within 10
seconds.
4.
Press the
ENTER
knob button (4) to confirm your selection and exit system
menu. The unit will automatically exit the audio menu after 10 seconds of
inactivity.
The following items can be adjusted:
Beep On/Off: Turn the audible beep On/Off (heard when functions /buttons are
selected).
Note: Beep tone off will not affect the audible tone of the alarm clock.
LCD Brightness: Adjust the brightness of the LCD backlight from “BRI 0” (off) to
“BRI 9” (Brightest).
