Jensen JWM60A, Installation And Owner'S Manual

JWM6

0A

BASIC OPERATION

1

2

3

4

6

8

9

10

11

12

13

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

14

5

7

Power

Volume Control

Audio Menu Setting

Audio Adjustment

System Menu Setting

Setting the Bluetooth

Reset

Loudness

Mute

Liquid Crystal Display (LCD)

Press the 

POWER

 button (3) to turn the unit on or enter standby mode.

The unit will resume at the last mode (Tuner, Aux, etc.) after turn on. 

Rotate the VOL encoder knob control (13) clockwise to increase or counter-
clockwise to decrease the volume output.
The maximum volume setting is “40”. While adjusting the volume, the LCD 
displays numerical representation of the level.

Press the 

AUDIO

 button (31) to step through the following audio adjustment 

options.
Rotate the 

VOL/ENTER

 encoder knob control (13) to adjust the selected audio 

feature.

This function will time out after six seconds of inactivity and the unit will 
resume normal operation.

The following items can be adjusted:

Ÿ

Beep On/Off: Turn the audible beep On/Off (heard when functions /buttons are 
selected).
Note: Beep tone off will not affect the audible tone of the alarm clock.

Ÿ

LCD Brightness : Adjust the brightness of the LCD backlight from “BRI 0” (off) to 
“BRI 9” (Brightest)

Ÿ

Region (USA/Europe): Set frequency spacing for various regions.

Ÿ

Bluetooth (On/Off): Choose “Bluetooth On” or “Bluetooth Off”.

Ÿ

Bluetooth Device (Locked/Unlocked, Disconnect/Connect, Delete): view, lock 
and delete from a list of previously paired mobile device models.

Ÿ

Bluetooth Pair: Press “ENTER” knob to automatically pair a device.

Ÿ

PRESET Volume (PVOL): Select an automatic turn on volume.

Ÿ

BAS: Adjust the Bass level from “-7” to “+7”

Ÿ

TRE: Adjust the treble from “-7” to “+7”.

Ÿ

BAL: Adjust the speaker output balance between “L7” (left) and “R7” (right). 
“BAL 0” indicates an equal balance between the left and right speakers.

Ÿ

FAD: Adjust the speaker fade between “R7” (rear) and “F7” (front). “FAD 0” 
indicates and equal balance between the rear and front speakers.

1.Press the 

SETTING

 button (29) to enter the system menu. 

2.Press 

SETTING

 button or press the |<< or >>| ( 6,35) to choose the following 

system menu list: 

3.Once the desired menu item appears on the display, adjust that option by rotating 

the volume encoder knob clockwise or counter-clockwise within 6 seconds.

4.Press the 

ENTER

 knob button to confirm your selection and exit system menu. The 

unit will automatically exit the audio menu after 6 seconds of inactivity.

Press the 

LOUD

 button (32) to toggle the loudness function on/off.

Press the

 MUTE

 button (34) to silence the audio output in tuner, CD, DVD, BT, USB 

or auxiliary input mode. Press again to restore the previous volume level.

The liquid crystal display (LCD) panel (1) displays the frequency, time and activated 
functions.
Press the 

BRIGHT UP

 button to increase the LCD brightness and press the 

BRIGHT 

DOWN

 button to decrease the LCD brightness from “LEVEL 0(off)” to “LEVEL 9” 

(brightest).

NOTE: When subjected to cold temperatures for an extended period of time, 
LCD panels will take longer to illuminate and the display visibility may slightly 
decrease. Optimal LCD operation will return to normal when the temperature 
increases to a normal range.

7

Press 

ENTER

 knob button to reset the JWM60A to factory default set up values.