JWM6A
6
Bluetoot
h (On/Off): Choose “Bluetooth On” or “Bluetooth Off”.
PRESET VOL:(1/40-40/40): Select an automatic turn-on volume.
RESET <ENTER>: Press the
ENTERSEARH
button to return the JWM6A to factory
default set up values.
Auxiliary Input Function
When a portable audio device is connected to the unit, press the
MODE DISPLAY
button (5)
repeatedly until AUX1 IN / AUX2 IN mode is selectable. To connect a portable audio device,
insert a standard 3.5mm (audio line output or headphone output from your portable CD / MP3 /
iPod or other media player) into the
AUX
connector (AUX FRONT) (27) on the front of the unit or
the
AUX-IN
RCA jack (AUX AUDIO INPUT) on the rear of the unit.
Auxiliary Input Connector
For front panel audio input, an external audio source can be connected to the front panel audio
input with a 3.5mm audio cable adapter. Connect the device to the
AUX
connector (27) on the
front panel.
In addition to front panel auxiliary input source, the unit can also be connected to the RCA audio
input through the
AUX AUDIO INPUT
jack on the rear of the unit.
Coaxial
When a portable audio device is connected to the unit, press the
MODE DISPLAY
button
repeatedly until Coaxial mode is selectable. To connect a portable audio device, connect the
coaxial cable output from your portable CD / MP3 / iPod or other media player into the Coaxial
Jack on the rear of the unit.
Optical
When a portable audio device is connected to the unit, press the
MODE DISPLAY
button
repeatedly until Optical mode is selectable. To connect a portable audio device, connect the
optical cable output from your portable CD / MP3 / iPod or other media player into the Optical
Jack on the left of the unit.
USB Interface Connector
as
You can connect a USB device directly to
USB interface (28) on the front of the
JWM6A for playback of compatible files.
Playback begins automatically. Press the
MODE DISPLAY
button repeatedly until
USB mode is selectable. Refer to
“MP3/USB Operation” on page 12 for
additional operating instructions.
Liquid Crystal Display (LCD)
The current activated functions and time are shown on the LCD panel (1).
NOTE: LCD panels may take longer to respond when subjected to cold temperatures for
an extended period of time. In addition, the visibility of the numbers on the LCD may
decrease slightly. The LCD display will return to normal when the temperature increases
to a moderate range.
Clock Setup
Press and hold
the
MODE DISPLAY
button (5) for 2 seconds to enter to clock mode.
Press and
hold
ALARM ON/OFF
button (22) for 2 seconds and the clock displayed on the LCD will be
flashing. Then, press the
|<<
button (15) to adjust the hour or press the
>>|
button (16) to adjust
the minute. Continue adjusting the hour to move from AM to PM. Press the
ENTER SEARCH
button (20) to save the new time and exit the clock setting menu.
If the new time is not confirmed by pressing the
ENTER SEARCH
button, the unit will
automatically exit the clock setting menu after 10 seconds of inactivity and the new time will be
set.
Setting the Alarm
To set the alarm,
press and hold
the
ALARM SET
button (24) for 2 seconds and the clock digits
will be flashing. Press the
|<<
button (15) to adjust the hour or press the
>>|
button (16) to adjust
the minute of the alarm time. Continue adjusting the hour to move from AM to PM. Press the
ENTER SEARCH
button to save the new alarm time and exit the alarm setting menu. Press the
ALARM ON/OFF
button to turn the alarm on or off. The
“ALARM” on the LCD display will
illuminate correspondingly.
If the new alarm time is not confirmed by pressing the
ENTER SEARCH
button, the unit will
automatically exit the alarm setting menu after 10 seconds of inactivity and the new alarm time
will be set.
Sleep Time
The Sleep Timer will automatically turn off the JWM6A in the designated number of minutes.
To set the Sleep Time, press the
ALARM SET
button (24) and the sleep time will be displayed
with the number representing the minutes (SLEEP 15). Press
ALARM SET
button repeatedly to
change the sleep time from OFF, 15, 30, 45 or 60 minutes. The
“ON” or “OFF” under the “SLEEP”
at the right bottom corner will illuminate correspondingly.
Press the
AS/PS
button (25) to exit the sleep timer setting menu, or the unit will
automatically exit the sleep timer setting menu after 10 seconds of inactivity.
