Jensen Mobile Multimedia AM/FM/DVD Receiver VM9311, Instruction Manual

16

VM9311

DVD/VCD VIDEO OPERATION

NOTE: When properly installed, DVD video cannot be 
displayed on the main TFT screen unless the parking break is 
applied. If you attempt to play a DVD while the vehicle is 
moving, the TFT screen displays “PARKING” with a blue 
background. Rear video screens, if applicable, will operate 
normally.

Opening/Closing the TFT Video Screen

Opening the TFT Screen

To open the TFT video screen, press the 

OPEN

 (1) button. 

The unit beeps and then opens.

Closing the TFT Screen

Press the 

OPEN

 (1) button again to close the TFT screen. If 

the screen is in the “IN” position, it moves out before closing. 
Once the TFT screen is closed, the LCD panel displays the 
current status.

DVD LCD Display

1.

Current Playing Chapter

2.

Current Playback Time

3.

SC - Scan Playback; RPT - Repeat Playback; 
RDM - Random Playback; ALL - Playback All Discs

Inserting a Disc

Upon inserting a DVD disc, DVD mode is entered disc play 
begins. If the TFT screen is closed, the DVD indicator 
appears lit on the LCD screen.

NOTE: If Parental Lock (Rating) is activated and the disc 
inserted is not authorized, the 4-digit code must be 
entered and/or the disc must be authorized (see 
“RATING (Parental Lock) Menu” on page 19).

You cannot insert a disc if there is already a disc in the unit. 

NOTE: DVD-R and DVD-RW will not play unless the 
recording session is closed and the DVD is finalized.

Ejecting a Disc 

Press the   button (21) on the front panel or remote control 
(25) to eject the disc. The unit automatically reverts to Tuner 
mode. 

This unit is equipped with Keyless Disc Eject, allowing you to 
eject a disc with the power off. The unit remains off after the 
disc is ejected.

Reset the Loading Mechanism

If the disc loads abnormally or an abnormal core mechanism 
operation occurs, press and hold the   button (21) on the 
front panel or remote control (25) to reset the loading 
mechanism. Normal operation resumes. 

Controlling Playback

Stopping Playback

Press the

 6/STOP

 button (13) on the front panel or the 

/

BAND

 button (20) on the remote control to stop DVD play.

To resume playback, press the joystick 

ENTER

 button (20) 

on the front panel or the 

>/||

 button on the remote control 

(18).

Pausing Playback

Press the joystick 

ENTER

 button (20) on the front panel or 

the 

>/||

 button on the remote control (18) to suspend or 

resume disc play.

Slow Motion Playback

Press the 

V

 button (19) on the joystick to play the current title 

in slow motion at 1/2, 1/4, 1/6 or 1/7, the normal speed. Press 

>/||

 (18) to resume normal play. 

Fast Forward

Press the 

>>

 button (14) on the remote control or the 

/\

 button 

(18) on the joystick to fast forward. Keep pressing and 
releasing the button to increase the rate from “2X” to “4X”, 
“8X”, and “20X”. 

Repeat Playback

Press the 

4/REP

 button (11) on front panel or the 

REPT

button (7) on remote control to alter repeat mode according to 
the following:

•

DVD: Repeat Title, Repeat Chapter, Repeat Off

•

VCD (PBC Off): Repeat Single, Repeat Off

NOTE: For VCD play, the repeat function is not available 
if PBC is on.

Sectional Repeat Function (A-B)

Use the A-B function to define a specific area of a disc to 
repeat.

•

Press the 

REPT

A-B

 button (6) on the remote control to 

set the start point (A) of the repeated section. 

•

Press the 

REPT A-B

 button again once you reach the 

desired end point (B) of the repeated section. The 
selected portion of the DVD will now repeat continuously. 

•

Press the 

REPT A-B

 button again to cancel the A-B 

section setting and stop repeat play. 

Random Playback

With a DVD, VCD, or CD playing, press the 

5/RDM

 button 

(12) on the front panel or the 

RDM

 button (33) on the remote 

control to activate random playback and play all chapters/
tracks in random order. “Shuffle On” appears on the screen. 

Press the 

>>|

 button (19) on the remote control or the 

>

button on the joystick (17) to play the next random track.

Press the 

RDM

 button again to turn random play off. “Shuffle 

Off” appears on the screen.

NOTE: When a VCD is playing with PBC turned “On”, 
activating random playback automatically turns PBC off. 

Accessing the DVD Menu

Press the 

MENU

 button (1) on the remote control to recall the 

main DVD menu. Use the directional (arrow) buttons (

<

, 

>

, 

/\

& 

V

) on the joystick (16, 17, 18, 19) to select a title from the 

menu.

Press the 

TITLE

 button (2) on the remote control to select a 

different title for playback.

Press the 

>/||

 button (18) on the remote control or the joystick 

ENTER

 button (20) to confirm your selection and begin 

playback.

Moving Through Chapters

Press the 

>>|

 button (19) on the remote control or the 

>

button on the joystick (17) to advance to the next chapter on 
the DVD. 

Press the 

|<<

 button (17) on the remote control or the 

<

button on the joystick (16) to move to the previous chapter.

Goto Search

During DVD or VCD playback, perform the following steps to 
use the GOTO feature to access a specific location on a disc: 

1.

Press the 

GOTO

 button (21) on remote control to enter 

“GO TO” mode.

2.

Press the 

>>

 or 

<<

 buttons (14, 22) on the remote 

control or the 

/\

 or 

V

 buttons (18, 19) on the joystick to 

select a category (highlighted in blue).

•

For DVD mode, you can choose Time or Title/Chapter 
search.

1

2

3