background image

VM9020TS

16

00:41:28 – “00:41:28” indicates the playback time of the 
current title.

 2 / 6 Eng – The language display information 

indicates the second language out of 6 (English) is 
currently being used.

The following information appears at the 

bottom

 of the screen 

during DVD playback:

Front: DVD is the current playback source for the front 
zone.

Rear: AUX IN is the current playback source for the rear 
zone.
"Surround II" is the selected playback audio encoding 
process. 
"DSP" indicates Digital Signal Processing. 

VCD Playback Information

The following information is displayed on the screen during 
VCD playback:

VCD2.0 – Format of current disc.

T: 6/18 – “6/18” indicates the sixth of 18 tracks on the 
VCD is currently playing.

00:02:18 – “00:02:18” indicates the playback time of the 
current track.

The following information appears on the screen during VCD 
playback in 6-Channel mode:

Front: DVD – “DVD” is the current playing source for the 
front zone.

Rear: AUX IN – “AUX IN” is the current playing source 
for the rear zone.
“MPEG” is the decoding method in use.
"Movie" indicates that movie effects are being applied to 
the audio sound track from the VCD. 

The following information appears on the screen during VCD 
playback in 2-Channel mode:

Front: DVD – “DVD” is the current playing source for the 
front zone.

Rear: AUX IN – “AUX IN” is the current playing source 
for the rear zone.

EQ:FLAT – The equalizer setting is FLAT.

Loud: Level 1 – The Loud option is set to Level 1 
loudness. 

General Disc Information

Front: DVD      Rear: AUXIN          SURR II         DSP

Front: DVD      Rear: AUXIN          MPEG         MOVIE

Table 9: Disc Properties

Symbo

l

12cm Disc Properties

Max Play 

Time

Single side single layer (DVD-5)
Single side double layer (DVD-9)
Double side single layer (DVD-10)
Double side double layer (DVD-18)

(MPEG 2 

Method)

133 minutes
242 minutes
266 minutes
484 minutes

Single side single layer (VCD)

(MPEG 1 

Method)

74 minutes

Single side single layer

74 minutes

Table 10: Disc Symbols

Symbol

Meaning

Number of voice languages recorded. The num-
ber inside the icon indicates the number lan-
guages on the disc (maximum of 8).

Number of subtitle languages available on the 
disc (maximum of 32).

Number of angles provided (maximum of 9).

Aspect ratios available. “LB” stands for Letter Box 
and “PS” stands for Pan/Scan. In the example on 
the left, the 16:9 video can be converted to Letter 
Box video.

Indicates the region code where the disc can be 
played.

Region 1: USA, Canada, East Pacific Ocean 
Islands

Region 2: Japan, Western Europe, Northern 
Europe, Egypt, South Africa, Middle East

Region 3: Taiwan, Hong Kong, South Korea, 
Thailand, Indonesia, South-East Asia

Region 4: Australia, New Zealand, Middle and 
South America, South Pacific Ocean Islands/
Oceania

Region 5: Russia, Mongolia, India, Middle 
Asia, Eastern Europe, North Korea, North 
Africa, North-West Asia              

Region 6: Mainland China

ALL: All regions

Summary of Contents for Mobile Multimedia DVD/MP3/WMA Receiver VM9020TS





























Reviews: